> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h30-description/specifications.md).

# Specifications

## General

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Product name</strong></td><td>OP48H10</td></tr><tr><td><strong>Module type</strong></td><td>High-density I/Os</td></tr><tr><td><strong>Form factor</strong></td><td>OPAL-RT Type-H</td></tr><tr><td><strong>Operating temperature</strong></td><td>0–40 °C (32–104°F)</td></tr><tr><td><strong>Storage temperature</strong></td><td>–40 to 85 °C (–40  to 185 °F)</td></tr><tr><td><strong>Relative humidity</strong></td><td>10–90 %, non-condensing</td></tr><tr><td><strong>Maximum altitude</strong></td><td>2,000 m</td></tr><tr><td><strong>Intended use</strong></td><td>Indoor use only</td></tr></tbody></table>

## Digital inputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels and banks</strong></td><td><p>64 channels in 4 banks of 16 channels</p><p>Each bank is configurable in software as inputs or outputs</p></td></tr><tr><td><strong>Voltage range</strong></td><td>Nominal Voltage Range: 5-30 V<sup>1</sup></td></tr><tr><td><strong>Input threshold</strong></td><td>VTH and VTL are software-configurable for each bank. From 0 to 30 V, 120 mV resolution.</td></tr><tr><td><strong>Absolute maximum input voltage</strong></td><td>-15 V +40 V</td></tr><tr><td><strong>Input impedance</strong></td><td>> 100 kΩ</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Minimum pulse</strong></td><td>&#x3C; 50 ns</td></tr><tr><td><strong>Rise / fall time</strong></td><td>No minimum required: Schmitt-trigger input</td></tr><tr><td><strong>Maximum toggling rate</strong></td><td>> 20 Mb/s</td></tr><tr><td><strong>Propagation delay</strong></td><td>&#x3C; 35 ns</td></tr></tbody></table>

<sup>1</sup> The 5-30 V supply voltage for output banks (V<sub>USER</sub>) is supplied externally by the user and has to be routed externally into the DB37 connector (P2\&P4). See page: [**DB62F Pin Assignment**](https://opal-rt.atlassian.net/wiki/spaces/PHDGD/pages/1337196987).

If no external supply is provided on the VUSER pin for a given bank, the digital outputs will supplied by a 4.8 V internal backup supply rail.

## Digital outputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels and banks</strong></td><td><p>64 channels in 4 banks of 16 channels</p><p>Each bank is configurable in software as inputs or outputs</p></td></tr><tr><td><strong>Voltage range</strong></td><td>Nominal Voltage Range: 5-30 V<sup>1</sup></td></tr><tr><td><strong>Output voltage at 5 V</strong></td><td><p>V<sub>OL</sub> = 0.4V</p><p>V<sub>OH</sub> = V<sub>USER</sub> - 0.4V</p></td></tr><tr><td><strong>Output impedance</strong></td><td>&#x3C; 15 Ω</td></tr><tr><td><strong>Maximum output current</strong></td><td>25 mA per channel</td></tr><tr><td><strong>Load fault tolerance</strong></td><td>Output shorted to GND</td></tr><tr><td><br>Output shorted to another output</td><td></td></tr><tr><td><strong>Minimum pulse</strong></td><td>&#x3C; 1 µs</td></tr><tr><td><strong>Maximum toggling rate</strong></td><td>1 Mb/s <sup>2</sup></td></tr><tr><td><strong>Output rise / fall time (no load)</strong></td><td>&#x3C; 50 ns</td></tr><tr><td><strong>Propagation delay</strong></td><td><p>&#x3C; 90 ns at 25 °C for 30 V</p><p>&#x3C; 200 ns at 25 °C for 5 V</p></td></tr></tbody></table>

<sup>1</sup> The 5-30 V supply voltage for output banks (V<sub>USER</sub>) is supplied externally by the user and has to be routed externally into the DB37 connector (P2 & P4). See page: **DB62F Pin Assignment**.

If no external supply is provided on the VUSER pin for a given bank, the digital outputs will supplied by a 4.8 V internal backup supply rail.

<sup>2</sup> Maximum toggling rate is limited by thermal characteristics of the output drivers. See thermal limitations section in OP48H30 Description page.

## Analog inputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>16</td></tr><tr><td><strong>Maximum sampling frequency</strong></td><td>2 MSPS</td></tr><tr><td><strong>Resolution</strong></td><td>16 bits</td></tr><tr><td><strong>Input voltage range</strong></td><td>± 10 V differential and single-ended</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Input impedance</strong></td><td><p>500 kΩ ± 1% to GND</p><p>1 MΩ ± 2% Differential</p></td></tr><tr><td><strong>Absolute maximum input voltage</strong></td><td>± 50 V differential or relative to GND</td></tr><tr><td><strong>Small signal bandwidth (-3 dB)</strong></td><td>400 kHz</td></tr><tr><td><strong>Input latency</strong></td><td>TBD</td></tr><tr><td><strong>Noise</strong></td><td>&#x3C; 3 mV<sub>rms</sub></td></tr><tr><td><strong>Recommended warm-up time</strong></td><td>5 minutes</td></tr></tbody></table>

## Analog outputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>48 or 24</td></tr><tr><td><strong>Maximum sampling frequency</strong></td><td>1 MSPS for 48 channels<br>2 MSPS for 24 channels</td></tr><tr><td><strong>Output voltage range</strong></td><td>± 10 V</td></tr><tr><td><strong>Resolution</strong></td><td>16 bits</td></tr><tr><td><strong>Output impedance</strong></td><td>&#x3C; 3 Ω</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Maximum output current</strong></td><td>25 mA (Z<sub>LOAD</sub> > 400 Ω at 10 V)</td></tr><tr><td><strong>Load fault tolerance</strong></td><td>Output Shorted to GND<br>Output shorted to another output</td></tr><tr><td><strong>Rise / fall time (no load)</strong></td><td>&#x3C; 670 ns typical (20 V step, 10% - 90%)</td></tr><tr><td><strong>Accuracy</strong></td><td>±10 mV on the ±10 V range</td></tr><tr><td><strong>Output latency</strong></td><td>TBD</td></tr><tr><td><strong>Maximum noise</strong></td><td>&#x3C; 3mV<sub>rms</sub></td></tr><tr><td><strong>Recommended warm-up time</strong></td><td>5 minutes</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h30-description/specifications.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
