> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op53xx/digital-bidirectional-modules/op5369-description.md).

# OP5369 Description

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FK8yw4MNE4KVqfH7pxTOj%2FOP5369-board.png?alt=media&amp;token=c11d2644-ae38-4f4b-8810-14d4fd2df208" alt="OP5369 board " width="563"><figcaption></figcaption></figure>

The **OP5369** is a flexible **digital input/output module** designed for OPAL-RT simulators and expansion units. It features **32 configurable input/output channels** that support logic-level **signals input** within a **0–30 V input range** and **signals output** within a **4.5–25 V input range** , providing reliable and high-speed signal interfacing for real-time simulation and hardware-in-the-loop (HIL) applications.

For compatibility information, refer to the [Hardware Platforms Compatibility](https://www.opal-rt.com/docs/op53xx/overview/hardware-platforms-compatibility.md) table.

## Key features

* 32 configurable input/output channels grouped in 4 banks of 8 channels.
* Single-Ended Output Voltage 5-24 V, External Vuser
* Input voltage range 0-30 V
* High-input impedance (Zin > 100 k&#x3A9;*)*
* Programmable high and low logic thresholds on all input channels

## Input channel architecture

To maximize the flexibility of the digital input circuitry, the high, and low logic detection thresholds are programmable per bank in 120 mV steps across a range of 0 V to 30 V.

The default thresholds are LOW = 1.5 V, HIGH = 3.5 V. To improve noise immunity, a LOW-level threshold of 1/3 Vuser and a HIGH-level threshold of 2/3 Vuser are recommended.&#x20;

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FhjnQzs4WvcJBdjYlgndZ%2FOP5367-input_schem.png?alt=media&amp;token=83371178-4df3-427d-bf22-6b9f8d77385d" alt="OP5342 architecture"><figcaption></figcaption></figure>

## Output channel architecture

* Single-Ended Output Voltage 5-24 V, External Vuser
* An internal 4.5-volt Vuser available with Imax 300 mA  for banks 1 and 2, and 300 mA for banks 3 and 4
* Short Circuit Protection output
* Current 50 mA per channel and 550 mA per Vuser
* Initial value: Low

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FrXe9dHuUbExbHoIihgjL%2FOP5367-output_schem.png?alt=media&amp;token=7f0809b6-3a03-4c05-b4e3-8392eacb2d47" alt=""><figcaption></figcaption></figure>

## Typical use cases

The flexibility and wide voltage range of the **digital input circuit** make this module suitable in simulations of any applications that require reading digital signals between 0 V - 30 V where a high-input impedance (Zin > 100 kΩ) is acceptable.

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FspaLsnZVPmCmQLqgvz8Z%2FOP5367-input.png?alt=media&amp;token=ef044f71-d77b-48a7-a7da-345022fcd99d" alt=""><figcaption></figcaption></figure>

The flexible characteristics of the **digital output** module make it suitable in simulations of applications such as:

* MOSFET and IGBT switching
* Switch-mode power supplies
* DC-to-DC converters
* Motor control, solar power (photovoltaics)

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FzTkYwAffzhv2ZCgGTsqr%2FOP5367-output.png?alt=media&amp;token=8c82a49e-6171-4455-909d-aa79f2d4e734" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op53xx/digital-bidirectional-modules/op5369-description.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
