> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op53xx/digital-input-modules/op5353-description.md).

# OP5353 Description

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2Fofida1hiFQevy6WIKhWJ%2FOP5353_board.jpg?alt=media&amp;token=d480c60b-27de-463e-ad16-28ec04ce87c3" alt="OP5353 board " width="563"><figcaption></figcaption></figure>

The **OP5353** is a **digital input module** designed for OPAL-RT simulators and expansion units. It features  multiple **optically isolated input channels** that support logic-level signals within a **4–50 V input range**, providing reliable and high-speed signals for real-time simulation and hardware-in-the-loop (HIL) applications.

For compatibility information, refer to the [Hardware Platforms Compatibility](https://www.opal-rt.com/docs/op53xx/overview/hardware-platforms-compatibility.md) table.

## Key features

* 32 optically isolated input channels.
* 4 V to 50 V input voltage range
* 30 V maximum reverse protection
* 3.6 mA current threshold
* All inputs are sampled simultaneously, at up to 10 MSPS
* Choice of sink or source input connections (anode and cathode side signals available)

## Channel architecture

The optically isolated inputs accept a wide input voltage range, from 4 to 50 Volts. They have a low threshold current, typically 3.6 mA. Each input has reverse voltage protection of up to 30 Volts provided by a Schottky diode.

The schematic below represents the electrical circuit of one channel, from the Din+/Din- input signals coming from the unit under test (on the right) to the Din\_FPGA signal going to the FPGA processor of the real-time simulator (on the left).

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FzuQzzrp2TtQ3s76Qtl9b%2FOP533_optocircuit.png?alt=media&amp;token=04a615de-9a35-426b-a432-32b0a0002491" alt="OP5342 architecture"><figcaption></figcaption></figure>

* When current flows from Din+ to Din-, the output of optocoupler (A) is low and the Din\_FPGA signal is low.
* When no current flows, the optocoupler output (A) is high and the Din\_FPGA signal is high.
* Both Din+ and Din- pins (anode and cathode sides) are routed to the DB37F connector of the simulator and made available to the user.&#x20;
* The maximum current is 3.6 mA&#x20;

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2FcGrqj1uabhB0IrSezvFL%2FOP533_optocircuit_loop.png?alt=media&amp;token=a75685a6-ebd4-46cf-b743-7162ca474578" alt=""><figcaption></figcaption></figure>

## Typical use cases

The circuit makes it possible to use the module for **activation or open-circuit detection**, both in the high or low active state.

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2F0ovI6ukrKE5BPCwHHHSo%2Fhigh_side_activation.png?alt=media&amp;token=8c77262e-ccd4-4b60-86cb-d78f67e13bca" alt="Typical high and low side activation"><figcaption><p> </p></figcaption></figure>

***

<figure><img src="https://2047776775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgkXB7sd4eT4qhErY15uu%2Fuploads%2F0iFVzqJjZOOhXMkZQULW%2Fopen_circuit.png?alt=media&amp;token=1dfcced9-8f6c-4ce1-9f3e-f2bde06b0502" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op53xx/digital-input-modules/op5353-description.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
