> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op5707-io/op5707-io-overview/specifications-and-architecture.md).

# Specifications & Architecture

<figure><img src="https://3440085997-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXUiZJug24EgUAkan12He%2Fuploads%2F719kHuMVefy9EjM9QYDl%2Fimage.png?alt=media&amp;token=43afaf11-4821-4df2-b6f5-5bed7d39a110" alt=""><figcaption></figcaption></figure>

## Description

The OP5707-IO is an FPGA processor and I/O expansion unit using the **AMD Virtex-7™ FPGA** to provide **additional inputs and outputs** for existing OPAL-RT simulators and other FPGA processor and I/O expansion unit.

## Specifications

<table data-search="false"><thead><tr><th width="261">Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Form Factor</strong></td><td>5U rackmount (mounting brackets included)</td></tr><tr><td><strong>Dimensions (W × D × H)</strong></td><td>47.7 × 49.3 × 22.4 cm (18.8” x 19.4” x 8.8”)</td></tr><tr><td><strong>Power supply</strong></td><td>115 VAC ±15 V / 220 VAC ±30 V, 50-60 Hz, 8.0 A (115 VAC) / 4.0 A (220 VAC), 600 W max</td></tr><tr><td><strong>Operating Temperatures</strong></td><td>10 to 40 °C (50 to 95 °F)</td></tr><tr><td><strong>Storage Temperatures</strong></td><td>-55 to 85 °C (-67 to 185 °F)</td></tr><tr><td><strong>Relative Humidity</strong></td><td>10 to 90% non-condensing</td></tr><tr><td><strong>Max Altitude</strong></td><td>2000 m (6,562 ft.)</td></tr><tr><td><strong>Pollution</strong></td><td>Degree 2</td></tr><tr><td><strong>Ventilation Requirements</strong></td><td>Allow 15 cm (6") of clearance when not rack-mounted</td></tr><tr><td><strong>Intended Use</strong></td><td>Indoor use only</td></tr></tbody></table>

## FPGA processor and I/O expansion unit architecture <a href="#op4610xgsystemdescription-simulatorarchitecture" id="op4610xgsystemdescription-simulatorarchitecture"></a>

The diagram below shows the general architecture of the OP5707-IO FPGA processor and I/O expansion unit .

<figure><img src="https://3440085997-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXUiZJug24EgUAkan12He%2Fuploads%2FYgis376WvglEn601YUAL%2Fimage.png?alt=media&amp;token=bf7cd890-924d-4381-ba31-3ebd82c319b4" alt="" width="563"><figcaption></figcaption></figure>

The housing is divided into two functional sections. The lower section contains the power supply. It has room to receive an optional PCIe commucation card. The upper section includes the high-speed FPGA and the I/O modules for up to 256 I/Os.

<table><thead><tr><th width="240" valign="top">Component</th><th>Specification</th></tr></thead><tbody><tr><td valign="top"><strong>FPGA</strong></td><td><p><strong>AMD Virtex</strong><sup><strong>®</strong></sup><strong>-7 FPGA</strong> on VC707 board, 485T, 485 760 logic cells, 2 800 DSP slices</p><ul><li>Executes FPGA-based simulations using OPAL-RT’s RT-XSG toolbox</li><li>Manages all I/O lines</li><li>Exchanges data with the CPU via a high-speed PCIe link</li></ul></td></tr><tr><td valign="top"><strong>Carrier Board</strong></td><td><strong>8-slot</strong> <strong>carrier board</strong> supporting up to eight I/O modules, for a total of <strong>up to 256 I/Os</strong>.</td></tr><tr><td valign="top"><strong>SFP ports</strong></td><td><p><strong>16 SFP ports</strong> for high-speed communication with other FPGA-based systems or external devices</p><ul><li>Supports Xilinx Aurora protocol (1-5 Gbps) by default</li><li>Optional support for other protocols (e.g., Gigabit Ethernet)</li><li><p><strong>MuSE (Multi-System Expansion) support</strong> enables a simulator to act as a central unit for connecting remote I/O expansion chassis:</p><ul><li>Each SFP port can connect to one remote expansion unit.</li><li>Unused SFP ports remain compatible with <strong>generic Aurora</strong> communication links.</li></ul></li></ul></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op5707-io/op5707-io-overview/specifications-and-architecture.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
