> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op8666/operational-information/can-bus-communication-and-battery-enable-signal.md).

# CAN Bus Communication and Battery Enable Signal

The OP8666 has a **CAN Bus communication protocol** as well, which is the **standard protocol** widely used in **industrial equipment**. In addition, many commercially available battery packs require a 12 V Enable signal to turn on the battery.

The OP8666 added this additional Battery Enable signals to enable interface to such battery packs.\
Note that the output of these protocols is isolated from the main controller, however, they share the same ground among them.

<figure><img src="https://1188700823-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqSz7qPxQbRFCsCnF5Xtl%2Fuploads%2F6Spun37uuMeqKQT2E1YV%2Fimage.png?alt=media&amp;token=341581f5-8ac5-4f0d-b7ee-c1c24f90e782" alt="" width="282"><figcaption></figcaption></figure>

## CAN bus interface <a href="#can-bus-interface" id="can-bus-interface"></a>

The OP8666 uses an **isolated CAN Transceiver IC ISO1042** from Texas Instruments as a bridge to **connect** the **microcontroller CAN-A** to a **CAN bus**.

### Connections with Microcontroller <a href="#connections-with-microcontroller" id="connections-with-microcontroller"></a>

| ISO1042 pin name | Controller pin name | Controller pin |
| ---------------- | ------------------- | -------------- |
| **TXD**          | GPIO31 / CANA\_TX   | U11            |
| **RXD**          | GPIO30 / CANA\_RX   | T11            |

## Battery enable <a href="#battery-enable" id="battery-enable"></a>

The battery enable signal is achieved through **isolated optocoupler IC**, which turns ON and OFF the output accordingly.

### Connection with microcontroller. <a href="#connection-with-microcontroller" id="connection-with-microcontroller"></a>

| Signal name        | Controller pin name | Controller pin |
| ------------------ | ------------------- | -------------- |
| **Battery Enable** | GPIO35              | 193            |

## Termination and wiring <a href="#termination-and-wiring" id="termination-and-wiring"></a>

The CAN bus requires a **120R termination resistor** at the **far ends of the bus**. These resistors can be **installed easily on the unused RJ45 connectors**.

In addition, it is recommended to use a **twisted pair**, **shielded cable** with **100R-120R characteristic impedance** such as **Belden 3109A** for **best performance**.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op8666/operational-information/can-bus-communication-and-battery-enable-signal.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
