> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/pe-add-on-opal-rt/model-in-schematic-editor/configure-parameter-sets.md).

# Test Scenarios with Parameter Sets

Parameter **Sets** allow you to test the eHS circuit under different predefined conditions. Each set represents a complete configuration of parameter values, corresponding to a specific operating scenario.

During simulation, you can switch between parameter sets at any time. When a set is selected, all associated parameters are applied simultaneously, allowing instant changes in operating conditions.

This makes it possible to:

* Dynamically adjust operating conditions
* Compare model behavior across scenarios
* Perform sensitivity and robustness analysis efficiently

## Create and edit parameter Sets

Select a block and open the parameter **Sets** tab. By default, a single set is available.

<figure><img src="https://1300141755-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCyfrFRdgX5VC5iwM13Zm%2Fuploads%2F3m7siBN1D9qviaqA2mcE%2Fimage.png?alt=media&amp;token=0e917136-eda3-4173-bea7-772ef4b242ef" alt="" width="287"><figcaption></figcaption></figure>

To create a new set:

1. Click the **+** icon to add a new column
2. Enter values for the desired parameters
3. Repeat for each additional set

You can also create a new set by entering a value in an empty column.

To rename a set:

* Double-click the set name and edit it

<figure><img src="https://1300141755-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCyfrFRdgX5VC5iwM13Zm%2Fuploads%2FjZ7ri2MDt2X7EyUAbhyH%2FParameterSets.gif?alt=media&amp;token=d7e11133-5264-41f5-9482-3ab03f202610" alt=""><figcaption></figcaption></figure>

{% hint style="danger" %}

* Parameter values must remain within valid ranges; invalid values are rejected
* Leaving a cell empty resets the parameter to its default value
* Parameter sets are applied **as a whole**, individual values cannot be applied independently
  {% endhint %}

### Re-order columns

To re-order columns, drag and drop a column to the desired position.

<figure><img src="https://1300141755-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCyfrFRdgX5VC5iwM13Zm%2Fuploads%2FtvXfkd2LvFvS3OlNulSG%2FReorderParameterSets.gif?alt=media&amp;token=53c4112a-8efc-47df-a90f-5cbf93d2bfb4" alt=""><figcaption></figcaption></figure>

### Insert or remove columns

To insert or remove a column, click the **ellipsis (…)** above a column and select **Insert column left**, **Insert column right**, or **Remove column**.

<figure><img src="https://1300141755-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCyfrFRdgX5VC5iwM13Zm%2Fuploads%2FwAYnbaNFhVas6h5sCnF2%2Ffeature_add_remove_paramset1.gif?alt=media&amp;token=ba10af85-5f74-4dc5-936c-c74aba5c8d29" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/pe-add-on-opal-rt/model-in-schematic-editor/configure-parameter-sets.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
