> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/pe-add-on-opal-rt/model-in-schematic-editor/manage-firmware-and-simulator-setup/migrate-to-a-different-simulator-setup.md).

# Migrate to a Different Simulator Setup

A circuit may need to be migrated when changing the hardware platform, firmware, or solver generation. This is done by selecting a different **Simulator Setup**. During the migration, the Schematic Editor attempts to preserve the existing circuit configuration and I/O mappings whenever possible.

After switching simulator setups, review the circuit carefully before building or running the simulation.

{% stepper %}
{% step %}

### Verify interface connections

If some connections cannot be migrated automatically, a warning is displayed listing the affected connections.

Recreate any missing connections before proceeding.
{% endstep %}

{% step %}

### Review switch configurations

Migration may modify the switching method used by some switch blocks:

* **Single switches** are automatically configured to use the **Pejovic** switching method with the same parameter values as before.
* **Interpolated switches** are automatically configured to use the **Snubber Capacitance** switching method.

After migration, verify that all switches are configured with the desired switching method and adjust any related parameters as necessary.
{% endstep %}

{% step %}

### Verify the time step

The circuit time step may change after migration due to differences in firmware capabilities, solver generation, or hardware resources.

To maintain behavior similar to the original configuration, manually configure the time step to match the previous value when possible.

{% hint style="info" %}
If the requested time step is not supported by the new configuration, a build error may occur.
{% endhint %}
{% endstep %}

{% step %}

### Validate the migrated circuit

After migration:

* Review any migration warnings
* Verify all interface connections
* Verify switch configurations
* Check the configured time step
* Rebuild the circuit
* Review the **Build Report** for warnings or errors

Performing these checks helps ensure that the migrated circuit behaves as expected on the new simulator setup.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/pe-add-on-opal-rt/model-in-schematic-editor/manage-firmware-and-simulator-setup/migrate-to-a-different-simulator-setup.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
