> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/pe-add-on-simulink/model-and-simulation/configure-the-hardware-configuration.md).

# Configure the Hardware Configuration

## Overview

The Power Electronics Add-On must be configured to use a specific [**Hardware Configuration**](https://www.opal-rt.com/docs/pe-add-on-simulink/hardware-configurations-reference/default-hardware-configurations.md) before a simulation can be deployed. This configuration determines the type of FPGA board(s) targeted by the simulation, as well as the features available in the FPGA firmware.

The Power Electronics Add-On comes with a set of **Default Hardware Configurations** installed with the product. Custom hardware configurations may also be created using the **Hardware Configuration Manager** or through custom development by OPAL-RT.

## Configure the simulator

Expand the System Definition tree until the **Controller** section is reached.

Set the Operating System value as **Linux\_x64**, fill the IP Address and the credentials (Username: Admin, Password:*\<blank>)* then save.

<figure><img src="https://2999842053-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fe9Kk9pJCHht2LLBSxPap%2Fuploads%2FsVc4D0uVglLKklVPyklP%2Fimage.png?alt=media&amp;token=b5fdb316-bfa8-48c5-9cd9-1b114b64df22" alt=""><figcaption></figcaption></figure>

## Select a Hardware Configuration

{% stepper %}
{% step %}

### In the VeriStand System Explorer

* In the VeriStand System Explorer, navigate to the [**Power Electronics Add-On**](https://opal-rt.atlassian.net/wiki/spaces/PNIVS/pages/140151216) custom device in the configuration tree.
* Select a **configuration** from the drop down menu. Notice that the **Configuration Description** indicator lists the supported features of this configuration. The configuration tree is also updated accordingly.
* Enter your target credentials. The default NI target **Username** is *admin* and the default **Password** is blank.
* **Save** the System Definition file.

<figure><img src="https://2999842053-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fe9Kk9pJCHht2LLBSxPap%2Fuploads%2F91SlIg3StuN1uTrPrJOy%2Fselct_hardware_config.gif?alt=media&amp;token=93c7fdec-8537-443c-b9dc-f554c329cf69" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### In NI Measurement and Automation Explorer (NI MAX)

In the NI MAX configuration tree, expand **Remote Systems**, locate your target, and expand **Devices and Interfaces**.

Expand the **Chassis** and locate the FPGA card(s) in your target to verify that their aliases match those listed in the description for the Hardware Configuration (FPGA0, FPGA1, etc).

<figure><img src="https://2999842053-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fe9Kk9pJCHht2LLBSxPap%2Fuploads%2FIK9ndhwTpOeMcLQfK1zw%2Fimage.png?alt=media&amp;token=f675007b-c87f-41f0-9a39-2d07a68e751d" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/pe-add-on-simulink/model-and-simulation/configure-the-hardware-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
