> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/configure-ios/communication-protocol-ios/diane-rtdp/requirements-features-and-limitations.md).

# Requirements, Features & Limitations

## Software requirements

The **DIANE (RTDP)** driver is included by default with RT-LAB and does not require any additional installation.

## Hardware requirements

DIANE (RTDP) communicates over Ethernet (TCP/IP) using the simulator’s built-in LAN ports, **eliminating the need for additional hardware**. Standard Ethernet cables are required to establish these connections. For systems requiring extra network interfaces, DIANE (RTDP) can also operate over additional Ethernet ports provided by supported PCIe network cards. Check your hardware modularity options to determine which external PCIe network cards are supported.

## License requirements

### Simulator license

A basic RT-LAB license must be installed on the simulator to run simulations using DIANE.

### Workstation license

A workstation license is **not** required to run simulations in RT-LAB using DIANE.

## Supported features

* One UDP stream:
  * Only one UDP stream can be transmitted and/or received at one time.
  * The stream can be configured with a multicast IP address.
* User-configurable ports, IP addresses, and network interfaces.
  * Any valid port, IP address or network interface can be selected.
* Analog and discrete message types supported.
* A producer can be selected to be in both transmission and reception modes.
* Support for oversampling.

## Limitations

* No special limitation.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/configure-ios/communication-protocol-ios/diane-rtdp/requirements-features-and-limitations.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
