> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/configure-ios/communication-protocol-ios/iec-60870-5-104-slave/requirements-features-and-limitations.md).

# Requirements, Features & Limitations

## Software requirements

The **IEC 60870-5-104 slave** driver is included by default with <code class="expression">space.vars.Software</code> and does not require any additional installation.

## Hardware requirements

The IEC 60870-5-104 Slave protocol communicates over Ethernet (TCP/IP) using the simulator’s built-in LAN ports, **eliminating the need for additional hardware**. Standard Ethernet cabling is required to connect the simulator to an IEC 60870‑5‑104 master device. For systems requiring extra network interfaces, IEC 60870‑5‑104 can also operate over additional Ethernet ports provided by supported PCIe network cards. Check your hardware modularity options to determine which external PCIe network cards are supported.

## License requirements

### Simulator license

[Verify that an active RT-LAB license](https://www.opal-rt.com/docs/rt-lab/licensing-reference/simulator-license.md) with the following features is installed on the simulator to run simulations using the IEC 60870-5-104 Slave protocol:

| Feature Name                  | Required Status      | Description                                                                    |
| ----------------------------- | -------------------- | ------------------------------------------------------------------------------ |
| DP\_IEC\_60870\_5\_104\_SLAVE | enabled              | Enables IEC 60870-5-104 slave                                                  |
| DP\_TOTAL\_NUMBER             | 50 enabled (or more) | Number of activated I/O data points for Ethernet-based communication protocols |

{% hint style="info" %}
A **data point** represents any individual value exchanged with the simulator, such as a boolean, integer, analog value, status, coil, register, phasor, quality bit, timestamp, or event. For Ethernet‑based communication protocols, OPAL‑RT licensing counts each **transmitted or received data value** as **one data point**.

**Example for IEC 60870‑5‑104:**\
10 single points + 6 double points + 8 floating‑point measurands = **24 data points**
{% endhint %}

### Workstation license

A workstation license is **not** required to run simulations in RT-LAB using the IEC 60870‑5‑104 slave protocol.

## Supported features

* Supports IEC 60870‑5‑104 over TCP/IP
* Allows multiple slave instantiations within a single driver instance
* Each slave can be configured with its own:
  * TCP port
  * Ethernet adapter
  * IP address or IP alias
  * ASDU address
* Supports the following IEC 60870‑5‑104 commands:
  * General interrogation
  * Specific group interrogation
  * Single point write
  * Double point write
  * Regulating step write
  * Bitstring write
  * Normalized measurand write (with or without time tag)
  * Scaled measurand write (with or without time tag)
  * Floating‑point measurand write (with or without time tag)
  * Clock synchronization
* Supports IEC 60870‑5‑104 point control modes:
  * Select and execute
  * Select only
  * Execute only
* Each point can be configured as:
  * Input (controlled by the master)
  * Output (controlled by the simulation model)
* Points can be attached to:
  * General interrogation group
  * Cyclic reporting group
  * Specific interrogation groups (1–16)
* Event scan can be enabled per data type to trigger spontaneous reporting
* Configurable event scan rate
* Configurable maximum number of buffered events per data type
* Configurable low limit, high limit, threshold, and smoothing for analog points
* Optional RMS computation for floating‑point output points
* Configurable cause of transmission field size (1 or 2 octets)
* Supports reconnection with master devices if a connection is lost

## Limitations

* Only TCP/IP communication is supported
* A maximum of 255 slaves per model is supported
* ASDU addresses must be unique per slave
* RMS computation is available only for floating‑point output points


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/configure-ios/communication-protocol-ios/iec-60870-5-104-slave/requirements-features-and-limitations.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
