> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/get-started/configure-workstation-and-simulator-link/configure-network-settings.md).

# Configure Network Settings

{% stepper %}
{% step %}

### Choose a connection configuration

* LAN Connection (requires modifying the simulator’s network settings)
* Direct Ethernet Connection (requires modifying the workstation’s network settings)
* Network Switch Connection (usually requires modifying the workstation’s network settings)
  {% endstep %}

{% step %}

### Connect the workstation to the simulator

Use a standard Ethernet cable to connect the simulator’s LAN1 port to the workstation (either directly or through a network switch port). Refer to your System Description Document or simulator documentation to identify the LAN1 port.

{% hint style="danger" %}
If the workstation Ethernet adapter does not support Auto-MDIX, an Ethernet crossover cable must be used.
{% endhint %}
{% endstep %}

{% step %}

### Configure workstation or simulator network settings

To establish communication, the workstation and simulator must be in the **same subnetwork**. Both systems must be able to **ping each other’s IP address**. This can be achieved if:

* Both are on the same subnet, **or**
* Both are configured with a default gateway that enables communication.

{% hint style="info" %}
If needed, consult your IT department to ensure these requirements are properly configured.
{% endhint %}

**A- Modifying the simulator’s network settings**

Refer to the **Get Started** **section** of your simulator documentation.

**B- Modifying the workstation’s network settings**

The steps below apply to **Windows 11**. For other versions of Windows, refer to the corresponding Microsoft documentation.

1. Right-click the network icon (Wi-Fi or Ethernet) in your taskbar (bottom-right of the screen) and select **Network & Internet Settings**.
2. Click **Ethernet**.
3. Under **IP assignment**, click **Edit**.
4. In the dropdown menu, change the setting from **Automatic (DHCP)** to **Manual**.
5. Toggle **IPv4** to **On**.
6. Assign an IP address that matches your simulator’s network:
   1. The first three octets must match the simulator’s IP (e.g., if simulator = `192.168.12.17`, the workstation must be `192.168.12.XXX`).
   2. Choose a unique value for `XXX` (0–255) that is different from the simulator’s value and any other devices on the network.
   3. Use subnet mask `255.255.255.0`.
7. Click **Save** to apply the changes.
   {% endstep %}
   {% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/get-started/configure-workstation-and-simulator-link/configure-network-settings.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
