> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/artemis-library/artemis-ssn-wideband-line.md).

# ARTEMiS SSN WideBand Line

## Description

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-34758b74a570794dcbfeaf64d2325b4f6aa16606%2FArtemis_SSN_wideband_block.png?alt=media" alt="" width="230"><figcaption></figcaption></figure>

The **ARTEMiS SSN WideBand Line** block, located in the **ARTEMiS/SSN/Lines** library, implements an N-phase distributed-parameter transmission line model with frequency-dependent line parameters modeled directly in the phase domain.

{% hint style="info" %}
**Usage in RT-LAB for task decoupling**

The ARTEMiS-SSN WideBand Line block must be located at the top level of the RT-LAB compatible Simulink model.

Each ARTEMiS-SSN WideBand Line output can be connected only to Simscape Electrical Specialized Power Systems (SPS) components located inside RT-LAB top-level subsystems (names beginning with ‘SS’ or ‘SM’ prefixes).

No connection between ARTEMiS-SSN WideBand Line blocks is allowed at the top level. If such a connection is required, route each block’s connections inside the subsystems individually and make the connections between the ARTEMiS-SSN WideBand Line ports inside the subsystem.
{% endhint %}

Unlike the ARTEMiS SSN FD line model, which uses a constant modal transformation to compute frequency-dependent parameters, the WideBand model represents all frequency-dependent parameters in the phase domain, avoiding errors caused by a constant modal transformation.

Cables typically exhibit strong frequency dependence of the modal transformation matrix, which can make the FD line model inaccurate. The WideBand model is more accurate for cables. It is optimized for discrete real-time simulation, allows decoupling of the networks connected on each side, and supports multi-CPU simulations on an RT-LAB simulator.

{% hint style="danger" %}
This block requires a valid RT-LAB license on the simulator with the feature ARTEMiS enabled. Refer to[ ARTEMiS Requirements](https://www.opal-rt.com/docs/rt-lab/model-and-simulation/power-systems-with-artemis/artemis-requirements.md) for details.
{% endhint %}

## Mask parameters

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-69eef509d3fe6fe513cfca931c5c6ae9610a42c5%2FArtemis_SSN_wideband_mask.png?alt=media" alt="" width="563"><figcaption></figcaption></figure>

{% tabs %}
{% tab title="wb Line param" %}

<table><thead><tr><th width="249">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Number of phases</strong></td><td>The number of phases of the model (1-2-3-4-6-8-10-12).</td></tr><tr><td><strong>Line data variable</strong></td><td>The name of a MATLAB workspace variable containing the WideBand line parameters.<br>The variable wbfit is a structure containing the parameters of the model.</td></tr><tr><td><strong>Unique Tag Identifier</strong></td><td>A user-defined string that must be unique for each instance of this block in a Simulink model. (Note: in future releases, this parameter will be set automatically and will not be visible to the user.)</td></tr></tbody></table>
{% endtab %}

{% tab title="Measurement Param" %}

<table><thead><tr><th width="249.800048828125">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Voltage measurement and Current Measurement choice</strong></td><td>Choose whether to measure additional line quantities such as phase voltage or phase current.<br><strong>Note</strong>: voltage is measured phase-to-ground.</td></tr><tr><td><strong>Voltage and Current Label</strong></td><td>Specify labels for voltage and current values. If measurements are enabled, the provided labels are used to retrieve measurements: use ‘label_’s for the sending side of the line (the side connected to the source) and ‘label_r’ for the receiving side of the line.</td></tr></tbody></table>
{% endtab %}
{% endtabs %}

{% file src="/files/lmP9dBCD73xrk1cgMi0u" %}

<details>

<summary>Structure containing the parameters of the model <strong>wbfit</strong></summary>

<table><thead><tr><th width="249">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Nph</strong></td><td>Number of phases.</td></tr><tr><td><strong>Ng</strong></td><td>Number of propagation groups.</td></tr><tr><td><strong>tau</strong></td><td>Propagation delays.</td></tr><tr><td><strong>NYc</strong></td><td>Yc fitting order.</td></tr><tr><td><strong>YcNpR</strong></td><td>Number of real Yc poles.</td></tr><tr><td><strong>YcNpC</strong></td><td>Number of complex Yc poles.</td></tr><tr><td><strong>YcR</strong></td><td>Real Yc poles.</td></tr><tr><td><strong>YcCR</strong></td><td>Real part of complex Yc poles.</td></tr><tr><td><strong>YcCI</strong></td><td>Imaginary part of complex Yc poles.</td></tr><tr><td><strong>YcstD</strong></td><td>Yc constant residues.</td></tr><tr><td><strong>YcRres</strong></td><td>Residues of real Yc poles.</td></tr><tr><td><strong>YcCRres</strong></td><td>Real part of residues of complex Yc poles.</td></tr><tr><td><strong>YcCIres</strong></td><td>Imaginary part of residues of complex Yc poles.</td></tr><tr><td><strong>NH</strong></td><td>H fitting order.</td></tr><tr><td><strong>HNpR</strong></td><td>Number of real H poles.</td></tr><tr><td><strong>HNpC</strong></td><td>Number of complex H poles.</td></tr><tr><td><strong>HR</strong></td><td>Real H poles.</td></tr><tr><td><strong>HCR</strong></td><td>Real part of complex H poles.</td></tr><tr><td><strong>HCI</strong></td><td>Imaginary part of complex H poles.</td></tr><tr><td><strong>HRres</strong></td><td>Residues of real H poles.</td></tr><tr><td><strong>HCRres</strong></td><td>Real part of residues of complex H poles.</td></tr><tr><td><strong>HCIres</strong></td><td>Imaginary part of residues of complex H poles.</td></tr></tbody></table>

</details>

## Conserving ports

| Port                           | Description                      |
| ------------------------------ | -------------------------------- |
| **Voltage-current (N phases)** | N-Phase voltage-current signals. |

## Inputs

This block has no inputs.

## Outputs

This block has no outputs.

## Characteristics and limitations

| Characteristic                        | Value                                                                                                                         |
| ------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------- |
| SSN solver in the ARTEMiS Guide block | The SSN solver must be set to Trapezoidal because the ARTEMiS-SSN WideBand Line block uses the Trapezoidal solver internally. |
| Initialization                        | The block does not initialize in steady state; unexpected transients may occur at the beginning of the simulation.            |
| Direct Feedthrough                    | No                                                                                                                            |
| Discrete Sample Time                  | Yes, defined in the ARTEMiS Guide block                                                                                       |
| XHP Support                           | Yes                                                                                                                           |
| Work Offline                          | Yes                                                                                                                           |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/artemis-library/artemis-ssn-wideband-line.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
