> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/artemis-library/wideband-line-model-v2.0.md).

# Wideband Line Model (v2.0)

## Description

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-c8f6d8be2b3dca0e7307eec023d7ff9c886a8088%2FArtemis_SSN_wideband_modelV2_block.png?alt=media" alt="" width="468"><figcaption></figcaption></figure>

The **SSN Wideband line model v2.0** blocks, located in the **ARTEMiS/SSN/Lines** library, implement the Wideband line model (also known as the Universal Line Model ). They upgrade the previous SSN Wideband line models to resolve rare numerical issues and do not require X-type NIB at their terminals in SSN models.

The Wideband line models implement an N‑phase distributed-parameter line with frequency-dependent parameters. Unlike the Marti-type frequency-dependent (FD) line model, which applies a constant modal transformation, the Wideband model represents frequency dependence directly in the phase domain, avoiding errors from a constant modal matrix. This is particularly important for cables, where the modal transformation matrix varies strongly with frequency; the Wideband model offers improved accuracy for cables.

For RT-LAB task decoupling, the v2.0 model is provided as two half-line blocks that exchange traveling-wave data via Simulink signals. It can be used to decouple electric systems similarly to standard DPL models, but users must manually route the two half-models across SS\_ subsystems in RT-LAB.

Minimum delay requirement: the fastest propagation mode must have a transport delay of at least 2\*Ts, where Ts is the model sampling time.

Model symmetry: the left and right half-line models are identical and interchangeable.

{% hint style="danger" %}
This block requires a valid RT-LAB license on the simulator with the feature ARTEMiS enabled. Refer to[ ARTEMiS Requirements](https://www.opal-rt.com/docs/rt-lab/model-and-simulation/power-systems-with-artemis/artemis-requirements.md) for details.
{% endhint %}

## Mask parameters

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-983b5168cc4c73fc3c3bcfead09c302dbd11ea0b%2FArtemis_SSN_wideband_modelV2_mask.png?alt=media" alt="" width="468"><figcaption></figcaption></figure>

<table><thead><tr><th width="250.79998779296875">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>EMTP-RV Wideband line fitting file (.dat)</strong></td><td>The name of the Wideband fitting data file, produced by EMTP-RV fitter.</td></tr><tr><td><strong>Time step (s)</strong></td><td>The model sample time in seconds.</td></tr></tbody></table>

## Conserving ports

<table><thead><tr><th width="250.79998779296875">port</th><th>Description</th></tr></thead><tbody><tr><td><strong>Electric ports</strong></td><td>PM type ports corresponding to the electrical phase connections in SPS.</td></tr></tbody></table>

## Inputs

<table><thead><tr><th width="250.79998779296875">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>Traveling wave signal (Simulink)</strong></td><td>Simulink input that must be connected to the complementary half-line, including across RT-LAB SS_ subsystems when decoupling is required.</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="260.4000244140625">Name</th><th>Description</th></tr></thead><tbody><tr><td><strong>Traveling wave signal (Simulink)</strong></td><td>Simulink output that transmits traveling-wave data to the complementary half-line.</td></tr></tbody></table>

## Characteristics and limitations

| Item                 | Description                                                                                          |
| -------------------- | ---------------------------------------------------------------------------------------------------- |
| Minimum delay        | The fastest mode transport delay must be at least 2\*Ts (Ts = model sampling time).                  |
| Model symmetry       | Left and right half-line models are identical and interchangeable.                                   |
| Version improvements | v2.0 resolves rare numerical issues observed in the previous generation of SSN Wideband line models. |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/artemis-library/wideband-line-model-v2.0.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
