> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/efpgasim-library/simulink-sps-workflow/foster-thermal-network.md).

# Foster thermal network

## Description

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-7f5b654ead4f9f7df82b64094c20c40330efab05%2Fsps-ehs-foster-thermal-block.png?alt=media" alt="" width="352"><figcaption></figcaption></figure>

The **Foster thermal network** block, located in the **eFPGAsim/External circuit editor workflow/Monitoring** library, allows to compute the Foster Thermal Model representing heat transfer through a semiconductor module. It receives losses in watt from the thermal loss feature of eFPGASIM.

Parameters for the Foster network should be given from the outer case of the component to the inner junction of the component.

## Mask parameters

<figure><img src="https://96827845-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNRdpSk8kjn20gXAexnt6%2Fuploads%2Fgit-blob-7704ad784f42b7de462b1cac7bafa7c31ded9589%2Fsps-ehs-foster-thermal-mask.png?alt=media" alt=""><figcaption></figcaption></figure>

| Parameter                                         | Description                                                                                                                                            |
| ------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------ |
| **Foster Network parameter Resistances vector**   | Use this parameter to set the different thermal resistance. The vector values should be given from the outer case to the junction of the component.    |
| **Foster Network parameter Time Constant Vector** | Use this parameter to set the different thermal inertia. The vector values should be given from the outer case to the inner junction of the component. |
| **Initial temperature**                           | Use this parameter to set an initial temperature at the inner junction of the component.                                                               |
| **Sampling time**                                 | This parameter should be set at the same sampling time than the CPU simulation.                                                                        |

## Inputs

| Input                   | Description                                                                                               |
| ----------------------- | --------------------------------------------------------------------------------------------------------- |
| **Losses**              | This input should be connected to the eHS Looses outputs available when using the thermal losses feature. |
| **Ambient Temperature** | This input should be connected to a constant giving the ambient temperature of the simulated converter.   |

## Outputs

| Output                 | Description                                                                                                                                                            |
| ---------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Temperature layers** | This output the temperature of the different layer of the component. The different temperatures are given from the outter case to the inner junction of the component. |

## Characteristics and limitations

| Direct Feedthrough   | Yes |
| -------------------- | --- |
| Discrete sample time | YES |
| XHP support          | YES |
| Work offline         | YES |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/simulink-blocks-reference/efpgasim-library/simulink-sps-workflow/foster-thermal-network.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
