> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2021.md).

# Release Notes 2021

## Version: 2021.3.4

### New features

* **EXata**: Added a dedicated I/O interface for mapping network interface cards to EXata.
* **EtherCAT Master**: Added support for the Beckhoff EL2652 module.

### Bug fixes

* **FPGA drivers**: Fixed OP5033-XG FPGA programming when the SAFE bitstream is loaded and FPGA enumeration issues on OPAL-RTLinux.
* **OPAL-RT Board**: Fixed OP5330 connection structures when using configurable rates.
* **OPAL-RT Board**: Fixed OP5330 and OP5369 configuration issues when used exclusively in Schematic Editor.

## Version: 2021.3.3

### Bug fixes

* **OPAL-RT Board**: Fixed Synchronized Analog In (RCP) when used with the OP5369 digital bidirectional card.

## Version: 2021.3.2

### New features

* **Dolphin**: Added preliminary support for the PXH830 card on OPAL-RTLinux 3.x for real-time communication between subsystems.

### Bug fixes

* **RT-LAB**: Fixed UDP/IP real-time communication between subsystems on OPAL-RTLinux 3.x.
* **OPAL-RT Board**: Fixed model loading when using Encoder IN/OUT functionality.
* **ePHASORSIM**: Fixed the Multiphase Transformer `tap` I/O pin, which was not accessible as an output.

## Version: 2021.3.1

### Bug fixes

* **LabVIEW**: Fixed panel connections not loading correctly.

## Version: 2021.3

### New features

* **LabVIEW**: Added support for LabVIEW 2020.
* **I/O interfaces**: Added virtualized support for ARINC 429, C37.118 Master/Slave, CAN, DIANE, DNP3 Master/Slave, IEC 60870-5-104 Slave, IEC 61850, Modbus Master/Slave, OPAL-RT Board, OPC UA Server, Pickering, SCPI, Synchronization, TCP/UDP, and Triphase.
* **OP5330**: Added support in S-Function drivers and OPAL-RT Board.
* **OP5369**: Added support in S-Function drivers and OPAL-RT Board, including configuration of card thresholds.
* **FPGA S-Function**: Added the option to disable strict hardware mismatch validation.
* **IEC 60870-5-104 Slave**: Added support for Windows.
* **Pickering**: Added support for the 40-295-121-10/16-S97 card.
* **OPAL-RT Board**: Added support for the OP5033-XG Artix-7 board (OP5143 standalone).
* **MIL-STD-1553**: Extended automatic Data Ready management to error injection inputs.

### Improvements

* **RT-LAB**: Improved target management, model load error reporting, startup robustness, and model compilation recovery after failures.
* **Diagnostic report**: Added OPAL-RTLinux compatibility and RAM and motherboard information.
* **MinGW**: Improved error reporting when compiler setup fails.
* **EXata**: Improved network setup on OPAL-RTLinux.
* **DIANE**: Improved CPU usage of the asynchronous component.
* **FPGA**: Added RT-LAB version validation before flashing a bitstream.

### Bug fixes

* **RT-LAB**: Fixed OpalD processes remaining on the target.
* **ARINC 429**: Fixed memory corruption when clearing reception buffers.
* **DIANE**: Fixed shared-memory cleanup after reset.
* **DNP3 Master/Slave**: Fixed the application of initial values.
* **Modbus Master**: Fixed cycle rate and crashes at reset.
* **OPAL-RT Board**: Fixed VC707 and OP4520 remote detection, intermittent chassis matching, and licensing when central and remote systems span multiple subsystems.
* **SCPI**: Fixed command end-of-line handling for certain power supplies.
* **FPGA drivers**: Fixed VC707 detection and FPGA enumeration issues.

## Version: 2021.2

### New features

* **RT-LAB**: Added shared-memory block support for Windows simulations using MinGW.
* **MATLAB/Simulink**: Added support for R2020a and R2020b.
* **DNP3 Master**: Added support for double-bit binary inputs.
* **DNP3 Slave**: Added support for multiple slaves within one interface and deadbands for analog inputs.
* **Synchronization**: Added automatic network interface discovery and VLAN interface creation when required.

### Improvements

* **RT-LAB**: Improved model load/reset and project closing times.
* **RT-LAB**: The installer now configures the `RTLAB_ROOT` environment variable.
* **Pickering**: Improved asynchronous component core usage.
* **OPAL-RT Board**: Improved synchronization management for OP5600 (Spartan-3).

### Bug fixes

* **RT-LAB**: Now waits for the backend to terminate before closing a project.
* **RT-LAB**: Fixed projects configured on another host, network configuration latency, and snapshot file paths.
* **Orchestra**: Fixed the Wait-to-Go functionality.
* **I/O interfaces**: Prevented simulation crashes when an interface fails to initialize.
* **OPAL-RT Board**: Fixed analog-output voltage range configuration for slots reserved by eHS.
* **IEC 61850**: Fixed connectivity problems on non-English Windows installations.

### Breaking changes

* **OP4200**: Removed support for ARM architecture.
* **OPAL-RT Board**: Removed support for OP4200 systems used as central systems.
* **CAN**: Removed support for OP4200 (Zynq) hardware.

## Version: 2021.1

### New features

* **OPAL-RTLinux**: Added target support, with GCC as the default compiler.
* **RT-LAB**: Added Thermolib block support in multi-subsystem models.
* **Orchestra**: Added TCP/UDP communication support.
* **RT-LAB API**: Added I/O configuration import, export, and transfer between projects.
* **MATLAB/Simulink**: Added advanced-user support for R2020a and R2020b.
* **RT-LAB**: Added debugging of models running between Windows hosts and Linux targets.
* **Pickering**: Added support for the 40-295-121-10/12 PXI programmable resistor card.
* **DNP3 Slave**: Added double-bit binary inputs.
* **DNP3 Master**: Added integrity polling.
* **OPAL-RT Board**: Added support for the OP5369 digital card.
* **MIL-STD-1553**: Added the option to disable all remote terminals at simulation startup.

### Improvements

* **RT-LAB**: Compilation and load logs now identify the operating system used.
* **RT-LAB**: XHP is now enabled by default in model configurations.
* **RT-LAB**: Improved environment cleanup at startup.
* **RT-LAB**: Active projects are now closed when exiting RT-LAB or switching workspaces.
* **RT-LAB**: Diagnostic reports are now generated in XML format for browser compatibility.
* **Network configuration**: Harmonized configuration across drivers and added automatic IP alias generation.
* **EXata**: Improved the user workflow.

### Bug fixes

* **RT-LAB**: Fixed UI freezes when targets are unreachable or restarted.
* **RT-LAB**: Fixed model-name validation, project renaming, PyDev initialization, I/O interface visibility, and target status handling.
* **RT-LAB**: Fixed idle-time monitoring for multi-subsystem, multi-rate models.
* **OPAL-RTLinux**: Fixed shared-memory isolation, OpalD crashes, setup messages, and `OpFromFile` behavior.
* **Orchestra**: Fixed handling of default values.
* **OPAL-RT Board**: Fixed MMC license counting and multi-subsystem operation on 64-bit platforms.
* **C37.118 Slave**: Fixed multiple points connected to the same `OpOutput` block.
* **CAN / Modbus**: Fixed initialization failures caused by synchronization between real-time and asynchronous components.
* **AFDX**: Fixed kernel module loading across supported Red Hat kernel versions.
* **Pickering**: Fixed relay-card detection and usage, project reopening, resistive-card validation, and status reporting.
* **IEC 61850 / Modbus RTU**: Fixed model loading and resetting incompatibilities.

### Breaking changes

* **MATLAB/Simulink**: Removed support for R2012b and R2013b.
* **LabVIEW**: Removed support for versions 2013–2016; supported versions are now 2017 and 2019.
* **Windows simulation**: Removed the Microsoft Visual C++ compiler; MinGW is now the default compiler.
* **RT-LAB**: Removed the Restart function from the RT-LAB menu.
* **Simscape**: Models on OPAL-RTLinux require the Intel compiler.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2021.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
