> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2023.md).

# Release Notes 2023

## Version: 2023.3.2

### New features

* **FPGA-Based Simulation**: Added x32 and x64 license classes, solver reset pin support, and a low-latency solver strategy for eHS Gen5.

### Bug fixes

* **OPAL-RT Board**: Fixed disabled DIO direction settings for OP5369 and simulation reset failures caused by incorrect chassis IDs.

## Version: 2023.3.1

### Bug fixes

* **OPAL-RT Board**: Fixed enumeration of multiple FPGAs.
* **FPGA Scope**: Fixed operation on Red Hat systems.

## Version: 2023.3

### New features

* **Dashboards**: Added graph widgets.
* **Windows**: Added support for Windows 11.
* **CAN**: Added support for next-generation Kvaser CAN PCIe cards.
* **TCP/UDP**: Added VLAN (802.1Q) support and configurable message ordering for custom data frames.
* **ARTEMiS**: Added Grid Forming Control Library blocks and new protection relay examples.
* **ePHASORSIM**: Added an Excel migration tool from version 1.8 to 2.0.
* **ePHASORSIM**: Added support for ExciterAC7B, TurbineGovernorDEGOV, and Bus Coupler (ElmCoup) components imported from PowerFactory.

### Improvements

* **RT-LAB**: Improved model compilation warning visibility and AMD CPU performance on 64-bit OPAL-RTLinux targets.
* **FMU**: Improved robustness of DDF files generated by FMUConfGenerator.
* **ARTEMiS**: Improved offline simulation performance and updated Wideband and Marti-FD line/cable Gen-2 models.
* **ePHASORSIM**: Updated the PowerFactory Static Generator (ElmGenstat) component.
* **MMC**: Reorganized the MMC Valves Library for improved usability and maintainability and consolidated MMC HVDC examples.

### Bug fixes

* **Orchestra**: Fixed unidirectional data exchange, FMUConfGenerator restrictions, target upgrades with multiple Orchestra models, and missing public API functions.
* **RT-LAB**: Fixed projects closing when loading parameters from snapshots.
* **CAN**: Fixed configured maximum data ranges and bus-load monitoring.
* **Pickering**: Fixed configurations using multiple PXI chassis.
* **ePHASORSIM**: Corrected the `internalVang` output pin name.
* **RT-EVENTS**: Fixed removal of RTE-Drive blocks.

### Breaking changes

* **FMU**: Model Exchange FMUs are no longer supported.
* **ARTEMiS**: Removed obsolete machine, fault, transformer, and MOV models.
* **MMC**: Removed obsolete MMC4 demos.

## Version: 2023.2.1

### New features

* **MIL-STD-1553**: Added PCIe hardware and new firmware support.

## Version: 2023.2

### New features

* **MATLAB/Simulink**: Added support for R2022b and R2023a.
* **Python**: Added support for Python 3.9 and 3.10.
* **LabVIEW**: Added support for LabVIEW 2023 Q1.
* **Dashboards**: Added copy/paste support for widgets.
* **FMU/Orchestra**: Added Boolean variable support.
* **Model compilation**: Added a maximum-compatibility option for loading compiled models on different workstations without rebuilding.
* **OpDilInterface**: Added support for TCP/UDP and for using the block without connected inputs or outputs.
* **EtherCAT**: Added support for the Eurodrive MDX91A device.
* **FPGA-Based Simulation**: Added a Variable RLC component and expression and variable evaluation in Schematic Editor.
* **MMC**: Added a Modular Multilevel Matrix Converter example using average and switching-function models.

### Improvements

* **FMU**: Improved warnings for the default FMU time step.
* **Model compilation**: Improved precedence handling when manual compilation options conflict with defaults.
* **MMC**: Improved voltage-balancing control and switching-function model implementation.

### Bug fixes

* **Dashboards**: Fixed synchronization with RT-LAB.
* **Application Server**: Fixed compatibility settings being overwritten during installation.
* **RT-LAB API**: Fixed Python 3 compatibility for connection import and export.
* **FPGA Scope**: Fixed CPU-core assignment and connection loss during long simulations.
* **ARINC 429**: Fixed BNR data handling below configured minimum values.
* **Bluestorm**: Fixed 32-channel operation using two BEG006 cards.
* **CAN**: Fixed DLC handling when importing DBC files.
* **EtherCAT**: Fixed crashes with more than 20 bidirectional connections and multi-model operation.
* **IEC 60870-5-104**: Fixed model loading when used with Dolphin interconnect.
* **OPC UA**: Fixed TCP server interface binding and publish paths with duplicate datapoint names in different subfolders.
* **TCP/UDP**: Fixed Float and Double data type precision.
* **MMC**: Fixed gating-signal issues in MMC simulation bitstreams.

### Breaking changes

* **MATLAB/Simulink**: Removed support for R2018a, R2019a, and R2019b.
* **Operating systems**: Removed support for Windows 7, Windows 8, Windows Vista, and CentOS 7 targets.
* **RT-LAB API**: Removed `GetActiveModels` and replaced it with `GetActiveProjects`.
* **RT-LAB**: Removed the `OpEndianSwapper` and `OpPythonSFunction` Simulink blocks and the Macro Recorder feature.
* **ePHASORSIM**: OpenModelica models can no longer run in XHP mode.

## Version: 2023.1

### New features

* **MATLAB/Simulink**: Added support for R2022a.
* **OpDilInterface**: Added a Simulink block for mapping Simulink buses to RT-LAB inputs and outputs.
* **Orchestra**: Added hierarchical bus/structure data exchange between the framework and clients.
* **FMI**: Improved FMU integration through the Orchestra co-simulation framework.
* **Data recording**: OPREC files can now be loaded directly in MATLAB without conversion.
* **ePHASORSIM**: Added LimiterExciterUEL1, LimiterExciterUEL2, LimiterExciterMAXEX1, and LimiterExciterMAXEX2 support for PowerFactory DGS imports.
* **ePHASORSIM**: Added AC7B, AC8B, ESAC2A, EXAC3, IEEET2, IEEET3, TGOV3, WSHYDD, and WSHYGP models to the Excel configuration workflow.
* **OPAL-RT Board**: Added 64 LoadIN/LoadOUT ports and additional PWMOUT functionality, including channel disabling, dynamic phase shift, dynamic dead time, and an extended frequency range.
* **FPGA S-Functions**: Added PWMOUT channel disabling, dynamic phase shift and dead time, and an extended frequency range.
* **Synchronization**: Added the C37.238-2017 synchronization profile, Oregano revision 2.3 support, boot-time configuration, and timestamp offsets.
* **Pickering**: Added support for LXI TCP-based chassis.
* **IEC 61850**: Added control functionality for attributes using the CO functional constraint.
* **AFDX**: Added firmware 5.1 support for PCIe-C664-V2 cards.
* **Modbus Slave**: Added support for connections to multiple masters.
* **Modbus Master/Slave**: Added INT16, INT32, and UINT32 data types.
* **TCP/UDP**: Added IP aliasing.
* **CAN**: Added default and custom arbitration bit rates.

### Improvements

* **Build/Compilation**: Changed the default GCC optimization from `-O2` to `-O3`.
* **Licensing**: Added demo-license requests to the license request form.
* **OPAL-RT Board**: Configuration elements are now preserved when changing bitstream files or chassis types.
* **CAN**: Improved custom data-rate calculation to include the prescaler.
* **Communication protocols**: Network interface names are now case-insensitive.
* **RT-LAB**: Operating-system cores are excluded from those available for real-time simulation.
* **RT-LAB**: Improved project closing during model build and compilation.
* **IEC 61850**: Improved MMS attribute creation and SCL data-attribute parsing.

### Bug fixes

* **Data recording**: Fixed recordings containing vector signals.
* **Orchestra**: Fixed client initialization when the framework is loaded but not running.
* **RT-LAB**: Fixed loss of file-transfer configuration after recompiling a model.
* **IEC 61850**: Fixed Sampled Values IDs in transmitted packets.
* **Modbus**: Fixed Holding Register data integrity.
* **IEC 60870-5-104 Slave**: Fixed operation with more than 100 slaves.
* **FPGA S-Functions**: Fixed subsystem placement validation, shared-memory controllers across multiple models, and model loading with OpLnk blocks.
* **CAN**: Fixed Motorola endianness for CAN FD and DBC-imported data display.
* **FPGA Scope**: Fixed trigger selection and process cleanup after simulation reset.

### Breaking changes

* **MATLAB/Simulink**: Removed support for R2016a, R2016b, R2017a, and R2017b.
* **OPAL-RTLinux 32-bit**: Announced end of support for 2024.
* **Windows 7**: Announced end of support for the next major release.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2023.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
