> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2024.md).

# Release Notes 2024

## Version: 2024.4.7

### Improvements

* **RT-LAB / Dashboards**: Improved synchronization between the RT-LAB interface and Dashboards.

### Bug fixes

* **Data recording**: Fixed `.oprec` file handling with `OpRecInfo` and `OpRecRead`.
* **RT-LAB API**: Fixed `GetControlSignalDescription` when `.signal` files contain more than 24,000 control signals.
* **RT-LAB**: Projects can now compile while another simulation from the same user is running on the target.
* **IEC 61850**: Fixed configuration updates in Dashboards.

## Version: 2024.4.6

### Bug fixes

* **RT-LAB**: Fixed repeated simulation load instability with multi-subsystem models.
* **Shared memory**: Fixed model loading when using an RFM card.

## Version: 2024.4.5

### Bug fixes

* **RT-LAB**: Fixed model compilation getting stuck during the final steps.
* **Dashboards**: Fixed signal selection in models containing a large number of signals.

## Version: 2024.4.4

### Bug fixes

* **RT-LAB API**: Fixed resets preventing repetitive simulation execution through API scripts.
* **ScopeView API**: Fixed Python 3.11 support.
* **Synchronization**: Fixed Oregano card initialization in 1PPS and IRIG-B modes.

## Version: 2024.4.3

### New features

* **RT-LAB API**: Added support for Python 3.11.

## Version: 2024.4.2

### Bug fixes

* **IEC 61850**: Fixed Sampled Values publishing rate variations caused by simulator CPU speed.

## Version: 2024.4.1

### Improvements

* **OPAL-RT Board**: Added PWM output configuration information to model load logs.

### Bug fixes

* **FMU**: Fixed configuration generation for FMUs containing both Co-Simulation and Model Exchange types, and inconsistent connection files caused by invalid characters.
* **Dashboards**: Fixed installation when RT-LAB 2023.1 is already installed and the Application Server is running.
* **IEC 61850**: Fixed the Sampled Values 9-2LE configuration revision parameter.
* **Modbus Slave**: Fixed reception of multiple 32-bit registers written using function code `0x10`.

## Version: 2024.4

### New features

* **RT-LAB**: Added detection of simulations launched by another user on a target.
* **Dashboards**: Added data point aliases, panel sharing between projects, expanded widget navigation, X-Y graphs, additional switch shapes, and Text widget customization.
* **GT200**: Added support for the SCRAMNet GT200 shared-memory card.
* **IEC 60870-5-104 Slave**: Added timestamped commands for normalized, scaled, and floating-point values.
* **Modbus Slave**: Added support for TCP slave IDs up to 255.
* **OPAL-RT Board**: Added parallel programming of multiple OP4810-IO/OP4815-IO platforms for single-subsystem configurations.
* **Pickering**: Added support for 40-297A-040 and 40-262-002 programmable resistor cards.

### Improvements

* **RT-LAB API**: Improved performance of connection, parameter, signal, and block API operations.
* **RT-LAB**: Improved MinGW installation recovery, target installation feedback, recovery after abrupt UI shutdown, build error reporting, and compilation file handling.
* **Dashboards**: Improved performance for large models, widget usability, panel performance monitoring, and editing workflows.
* **I/O interfaces**: Improved asynchronous component core allocation to avoid using simulation cores.
* **FPGA drivers**: Improved OP4810-IO/OP4815-IO detection and configuration workflow.
* **OPAL-RT Board**: Improved configuration preservation when bitstream configurations change.
* **S-Function I/Os**: Improved data-port validation and OpCtrl/OpLnk initialization.
* **ARTEMiS**: Improved the SSN\_NewEngland39busRT example for online simulation.
* **ePHASORSIM**: Migrated example Excel templates to version 2.0.

### Bug fixes

* **RT-LAB**: Fixed target discovery, recorder operation after model renaming, LabVIEW panel connections, Simulink console opening, compilation freezes, subsystem assignments, and monitoring tool operation.
* **RT-LAB / Dashboards**: Fixed synchronization and prevented models from being started before being compiled for the correct platform.
* **Dashboards**: Fixed widget migration, value formatting, connection tables, and editing/display issues.
* **Installer**: Fixed installation on non-default drives and multi-user permission issues.
* **CAN**: Fixed multiplexed messages and the `No message` output.
* **FPGA Scope**: Fixed board identification and crashes when using a real-time core.
* **OPAL-RT Board**: Fixed MuSE overruns, bitstream configuration updates, firmware messages, file filtering, and digital-channel threshold validation.
* **S-Function I/Os**: Fixed analog-output range configuration and PWM inputs on the first data port.
* **Synchronization**: Fixed Oregano logs reporting the wrong network interface.
* **ARTEMiS**: Fixed online behavior of the TSB-RD 2-Level block and several example models.
* **eHS**: Fixed the Dual Active Bridge example model.

### Breaking changes

* **Dashboards**: Removed the default upper and lower limit colors from the Gauge widget.

## Version: 2024.3.2

### New features

* **IEC 61850**: Added support for sending reports to multiple client instances.

### Bug fixes

* **RT-LAB**: Fixed `OpenProject` API, MATLAB build crashes with R2022a and later, installation stability, and installation on non-`C:\` drives.
* **I/O interfaces**: Fixed OP7000 chassis support.
* **ePHASORSIM**: Fixed Excel compatibility and errors when opening the Solver block.

## Version: 2024.3.1

### Improvements

* **RT-LAB**: Improved target registration to prevent permanent locking.

### Bug fixes

* **RT-LAB**: Fixed isolation-loss events, intermittent model loading, MATLAB R2024a library display, and changing OPAL-RTLinux target IP addresses.

## Version: 2024.3

### New features

* **MATLAB/Simulink**: Added support for R2024a.
* **RT-LAB**: Added required-port connectivity validation at startup.
* **Dashboards**: Added a Text Display widget, configurable diagram refresh rate, widget comments, and installation error notifications.
* **AsyncSerial**: Added support for MOXA CP-116E-A and CP-118EL-A cards.
* **CAN**: Added runtime enable/disable control for cyclic message transmission.
* **EtherCAT Master**: Added Beckhoff EL3154, EL4124, and EL1018 support.
* **FPGA drivers**: Added OP48H20 module support for OP4810-IO/OP4815-IO expansion chassis.
* **Modbus Master/Slave**: Added MOXA CP-116E-A and CP-118EL-A support in RTU mode.
* **ePHASORSIM**: Added FMI 2.0 co-simulation support through the ComponentEPhasorsim package.
* **MMC**: Added HVDC Bipole and VSC examples.

### Improvements

* **RT-LAB**: Improved target status detection, refresh, and reboot handling.
* **Dashboards**: Improved auto-save, project import performance, application logging, widget usability, and Python script environment variables.
* **FPGA drivers**: Improved OP4810-IO/OP4815-IO programming stability, configuration views, and LCD information.
* **ePHASORSIM**: Decoupled the Core Solver classes from Simulink.
* **eHS**: Improved S-Function configuration loading before simulation.
* **MMC**: Improved HVDC examples, valve block configuration, and PWM/dead-time performance.

### Bug fixes

* **RT-LAB**: Fixed model resets with OPAL-RT Board/S-Function I/Os, disappearing targets, nested-project workspace imports, MetaController termination, licensing, and development-node configuration.
* **RT-LAB / Dashboards**: Fixed execution and pause state synchronization.
* **Dashboards**: Fixed multi-window operation, popouts, connection synchronization, non-ASCII RT-LAB API strings, Graph Widgets across multiple targets, and reset-state blocking.
* **CAN**: Fixed card enumeration and duplicate logging.
* **FPGA drivers**: Fixed communication loss after chassis reboots and crashes during bitstream programming.
* **OPAL-RT Board**: Fixed MuSE remote crashes/overruns and real-time PWM phase-shift configuration.
* **S-Function I/Os**: Fixed OpLnk advanced features, PWM dead-time/phase-shift inputs, commented I/O blocks, and AnalogOut voltage ranges.
* **TCP/UDP**: Fixed configurations containing multiple streams using the same NIC speed.
* **ARTEMiS**: Fixed the ThreeLevelInverter TSB 3-Level HiZ model.
* **ePHASORSIM**: Fixed FACTS parsing, load-flow calculation with switched-off branches, and real-time fault simulation in the Phasor03 PSS®E example.

### Breaking changes

* **RT-LAB**: Removed automatic RT-LAB installation on targets during model builds.
* **RT-LAB**: Signal recording through Python scripts is unavailable while the RT-LAB GUI is open.
* **ScopeView**: Deprecated the RT-LAB data source.
* **MMC**: Removed MATLAB R2019b and Red Hat 32-bit support.

## Version: 2024.1.9

### Bug fixes

* **FPGA S-Functions**: Fixed inverted dead-time and phase-shift behavior in the PWM Out block.

## Version: 2024.1.8

### Bug fixes

* **CAN**: Fixed multiplexed message transmission/reception, model-load crashes with unused multiplexed messages, and the `No message` output.

## Version: 2024.1.7

### Improvements

* **Modbus Master**: Improved TCP configuration validation by considering the slave ID.

### Bug fixes

* **RT-LAB**: Fixed builds containing double model references.
* **Orchestra**: Fixed S-Function compilation with MATLAB R2023a/R2023b.
* **FPGA drivers**: Fixed programming of remote MuSE bitstreams using non-default SFP line speeds.
* **ARTEMiS**: Fixed online TSB-RD 2-Level three-phase results.

## Version: 2024.1.6

### Bug fixes

* **RT-LAB**: Fixed MATLAB crashes during model builds with R2022a and later.
* **ARTEMiS**: Fixed online TSB-RD 2-Level three-phase results.
* **ePHASORSIM**: Fixed MATLAB/Simulink crashes with FMU components caused by missing logger initialization.

## Version: 2024.1.5

### Bug fixes

* **RT-LAB**: Fixed delays when opening projects.
* **S-Function I/Os**: Fixed FPGA detection on OP7000 platforms.
* **ARTEMiS**: Migrated the TSB 3-Level NPC HiZ block to ARTEMiS.

## Version: 2024.1.4

### New features

* **Modbus Slave**: Added Unit ID support in TCP mode.

### Bug fixes

* **Modbus Slave**: Fixed model loading with a single 32-bit value and byte ordering for INT32 and UINT32.
* **OPAL-RT Board**: Fixed overruns with MuSE remotes distributed across multiple subsystems.

## Version: 2024.1.3

### New features

* **eHS**: Added new `EHS_CORE_TOKEN` and `EHS_MACHINE_CORE_TOKEN` license keys with backward compatibility.

### Improvements

* **eHS**: Improved license error handling and eHS Gen4 High Performance licensing.
* **eHS**: Added model version, license class, and component usage information to diagnostic/build information.

## Version: 2024.1.2

### Improvements

* **ePHASORSIM**: Added a warning for unsupported PowerFactory `TypLod` dynamic loads.

### Bug fixes

* **ePHASORSIM**: Fixed Python API handling when Excel and third-party model filenames differ.
* **PowerFactory import**: Fixed islanded buses associated with open switches, exported `ElmCoup` switch status, and mapping of machines without saturation.

## Version: 2024.1.1

### Improvements

* **RT-LAB**: Added a warning that RT-LAB 2024.1 is the final release series supporting TestDrive and creation of new LabVIEW panels.

### Bug fixes

* **Dashboards**: Fixed lost connections after copying/pasting widgets and modification of individual vector elements.
* **I/O interfaces**: Fixed EEPROM corruption affecting analog-output cards.

## Version: 2024.1

### New features

* **MATLAB/Simulink**: Added R2023b support for RT-LAB.
* **FMU**: Added support for parameters and signals containing commas.
* **Dashboards**: Added Shape, Tabs, and Dropdown widgets, Python script execution, widget locking, and vector datapoints.
* **Data recording**: Added a UI option to migrate OPREC files from format 1.02 to 1.03.
* **FPGA Scope**: Added direct signal selection from ScopeView.
* **I/O interfaces**: Added OPAL-RT Board and S-Function support for OP4810-IO/OP4815-IO expansion chassis and the OP5367-6 mezzanine.
* **DNP3 Slave**: Added Control Relay Output Block (CROB) operations.
* **IEC 61850**: Added AccessPoint reference parsing.
* **Modbus Slave**: Added Unit ID support in TCP mode and operations across gaps between coil/register address ranges.
* **OPC UA Server**: Added IP aliasing.
* **ePHASORSIM**: Added PowerFactory 2021-2024 PSS®E-compatible machine controllers and `ElmVac` voltage source import.
* **ePHASORSIM**: Added external-component FMU logging options.
* **EXata CPS**: Added a UI for configuring EXata CPS with RT-LAB.
* **Pickering**: Added support for the 50-200-004 FIU card.
* **MMC**: Added FPGA firmware supporting 12 SFP connections on either the plant or control side.

### Improvements

* **RT-LAB**: Improved error handling, diagnostics, target status management, target stability, and snapshot logging.
* **ProbeControl**: Migrated the user interface to 64-bit.
* **Orchestra**: Simplified DDF file and domain configuration by removing the need for quotes.
* **Dashboards**: Improved simulation latency, project import performance, sidebar behavior, vector datapoint selection, graph stability, model synchronization, and general editing workflows.
* **Data Logger API**: Simplified `SignalGroupInfo` and `SignalGroup` connection workflows.
* **S-Function I/Os**: Improved model-load stability when incorrect data ports are configured.
* **eHS**: Improved eHS licensing diagnostics and build reporting.
* **MMC**: Improved STATCOM and M3C examples using the MMC Valves library.

### Bug fixes

* **RT-LAB**: Fixed API performance degradation, subsystem connection loss, target status, unassigned dynamic signals, renamed subsystems, nanosecond time steps, monitoring probes, ScopeView launching, and coexistence with older RT-LAB versions.
* **Dashboards**: Fixed freezes, graph triggering/scaling, connection persistence, vector editing, synchronization after model changes, copy/paste connections, and various widget editing issues.
* **CAN**: Fixed duplicate verbose configuration messages.
* **C37.118 Slave**: Fixed ROCOF values.
* **IEC 61850**: Fixed Sampled Values `confRev`, connection retention when SCL files change, duplicate datapoints, and GOOSE `numDataSetEntries`.
* **Modbus Slave**: Fixed multiple-coil writes, single 32-bit model configurations, integer byte ordering, and excessive verbose logging.
* **OPAL-RT Board**: Fixed chassis descriptions and bidirectional card voltage/threshold configuration.
* **Pickering**: Fixed resistive-card initialization from file-system configurations.
* **S-Function I/Os**: Fixed overruns involving specific board IDs.
* **TCP/UDP**: Fixed automatic EXata file transfer to simulators.
* **ePHASORSIM**: Fixed startup crashes, PowerFactory switch/bus imports, Python API filename mismatches, and offline FMU logging crashes.
* **FPGA-Based Simulation**: Fixed machine encoders, SFP operation, initial states, mutual-inductance configuration, Variable RLC stability, and machine control blocks.
* **FPGA Scope**: Fixed FPGA Scope restart/reset crashes.
* **OpCtrl S-Functions**: Fixed port validation for OP4810-IO and OP4815-IO.

### Breaking changes

* **MATLAB/Simulink**: Removed support for R2020a and R2020b.
* **RT-LAB**: Removed support for 32-bit Red Hat targets.
* **RT-LAB**: Removed deprecated `target_postload.py`, `target_postpause.py`, and `target_preexecute.py` hooks.
* **Dashboards**: Removed the onboarding tour.
* **Data Logger API**: Deprecated `SignalGroupInfo.get_id()`, `get_filename()`, `get_port()`, and IP/port-based `SignalGroup` connections.
* **ePHASORSIM**: Removed unsupported PowerFactory import blocks, decommissioned Red Hat `icc11` deliverables, and changed the Excel template format from `.xls` to `.xlsx`.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/rt-lab/whats-new-in-rt-lab-2026.3/release-notes-2024.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
