> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/scopeview/use-functions/advanced-functions/advanced-or-sisym3.md).

# Advanced | SISYM3

## SYMMETRIC COMPONENTS – \[SISYM3]

Compute the symmetric components of three signals for a given harmonic.

## **CATEGORY**

Advanced

![](https://content.gitbook.com/content/fwfLeQP2Iaoefor0ZUNi/blobs/G7fVqwojEEeUhL8wCdxS/image2018%209%2025_8%2024%2055.png)

## **DESCRIPTION**

This function is used to compute the symmetric components of three signals for a given harmonic. This function computes the module, the phase, and the real and imaginary parts for the symmetric components of a harmonics.

## **RESULT VARIABLES AND PARAMETERS**

<table><thead><tr><th width="167"></th><th></th></tr></thead><tbody><tr><td><strong>Module (m)</strong></td><td>Module (or amplitude) for the symmetric components of a harmonic, multiplied by the absolute value of the factor.</td></tr><tr><td><strong>Phase (a)</strong></td><td>Angle a (or phase) of the symmetric component sequence, between -180 and 180 degrees [°]. Since the module is multiplied by the absolute value of the factor, the phase is modified if the multiplying factor is negative. In this case, 180 degrees are added to the phase.</td></tr><tr><td><strong>Phase (a0)</strong></td><td>Angle of the symmetric component sequence, found between 0 and 360 degrees [°].</td></tr><tr><td><strong>Real (r)</strong></td><td>Real part r of the required symmetric component sequence (m * cos(a)).</td></tr><tr><td><strong>Imaginary (i)</strong></td><td>Imaginary part i of the required symmetric component sequence (m * sin(a)).</td></tr><tr><td><strong>Signal_A</strong></td><td>First signal to analyze.</td></tr><tr><td><strong>Signal_B</strong></td><td>Second signal to analyze.</td></tr><tr><td><strong>Signal_C</strong>:</td><td>Third signal to analyze.</td></tr><tr><td><strong>Freq</strong></td><td>Fundamental frequency of the signal in Hertz [Hz], normally computed with the sifreq function.</td></tr><tr><td><strong>Harmonic number</strong></td><td>Number of harmonic to compute.<br>- <strong>0</strong>: DC;<br>- <strong>1</strong>: Fundamental;<br>- <strong>2</strong>: 2nd harmonic;<br>- <strong>n</strong>: nth harmonic (max. 30).</td></tr><tr><td><strong>Sequence</strong></td><td>Sequence of symmetric components to compute.<br>- <strong>0</strong>: zero sequence<br>- <strong>1</strong>: positive sequence<br>- <strong>2</strong>: negative sequence</td></tr><tr><td><strong>Begin_time</strong></td><td>Time at which the analysis of a signal must start. This time is expressed in milliseconds [ms]. This value must be greater than 0 and lower than the duration of the test. The default value is 0.</td></tr><tr><td><strong>End_time</strong></td><td>Time at which the analysis of a signal must end. This time is expressed in milliseconds [ms]. The value of this time must be larger than the specified begin_time and smaller than the duration of the test. Use the “HUGE” value to specify the end of the test. The default value is HUGE. The <strong>begin_time</strong> and <strong>end_time</strong> specified for the calculation of the harmonics must be the same as those used in the sifreq sequences to compute the fundamental frequency.</td></tr><tr><td><strong>Factor</strong>:</td><td>Multiplying factor for the results generated by the function. The default value of the multiplying factor is 1.0 and has no effect on the results. The factor applies to the moyd, tmax and ttot results.</td></tr></tbody></table>

## **SYNTAX**

**\[m, a, a0, r, i]** = sisym3( a, b, c, 60, 1, 1, 0, HUGE, 1 )

## **CHARACTERISTICS**

Data type support

Double Floating point

## **EXAMPLE**

The following diagram shows the mathematical functions used to compute the symmetric components related to three signals.

<table data-header-hidden><thead><tr><th width="61"></th><th width="335"></th></tr></thead><tbody><tr><td><strong>m1</strong></td><td>module of required harmonic for signal 1</td></tr><tr><td><strong>m2</strong></td><td>module of required harmonic for signal 2</td></tr><tr><td><strong>m3</strong></td><td>module of required harmonic for signal 3</td></tr><tr><td><strong>a1</strong></td><td>angle of required harmonic for signal 1</td></tr><tr><td><strong>a2</strong></td><td>angle of required harmonic for signal 2</td></tr><tr><td><strong>a3</strong></td><td>angle of required harmonic for signal 3</td></tr></tbody></table>

$$
module\_homopolaire = \sqrt{xhom^2 + yhom^2} \\\[8pt]

module\_direct = \sqrt{xdir^2 + ydir^2} \\\[8pt]

module\_inverse = \sqrt{xinv^2 + yinv^2} \\\[8pt]

\tan(angle\_homopolaire) = (xhom) / (yhom) \\\[8pt]

\tan(angle\_direct) = xdir / ydir \\\[8pt]

\tan(angle\_inverse) = xinv / yinv \\\[8pt]

xhom = \frac{m1\cos(a1) + m2\cos(a2) + m3\cos(a3)}{3} \\\[8pt]

xdir = \frac{m1\cos(a1) + m2\cos(a2 + 120) + m3\cos(a3 - 120)}{3} \\\[8pt]

xinv = \frac{m1\cos(a1) + m2\cos(a2 - 120) + m3\cos(a3 + 120)}{3} \\\[8pt]

yhom = \frac{m1\sin(a1) + m2\sin(a2) + m3\sin(a3)}{3} \\\[8pt]

ydir = \frac{m1\sin(a1) + m2\sin(a2 + 120) + m3\sin(a3 - 120)}{3} \\\[8pt]

yinv = \frac{m1\sin(a1) + m2\sin(a2 - 120) + m3\sin(a3 + 120)}{3} \\\[8pt]
$$


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/scopeview/use-functions/advanced-functions/advanced-or-sisym3.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
