> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/blocks-functions-tools/machines/blocks/machines-control/shafts-and-speed-reducers/page-9.md).

# Speed Reducer

## &#x20;<a href="#speed-reducer" id="speed-reducer"></a>

Implement speed reducer

### Library <a href="#library" id="library"></a>

![](blob:https://opal-rt.atlassian.net/bf84d021-24e8-4da0-a43e-fe330dbc745c#media-blob-url=true\&id=7b6c4fee-c596-49e1-b2ac-222b12d47ae5\&collection=contentId-2449768464\&contextId=2449768464\&width=133\&height=125\&alt=\&clientId=61bad431-3370-4657-80b2-d23f748dc0c2)

SPS / Electrical Machines / Control / Shafts and Speed Reducers

### Description <a href="#description" id="description"></a>

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-96f965f3b9ca3ff502dbd7c6f379f0b096d5566b%2Fspeed_reducer_block.png?alt=media" alt=""><figcaption></figcaption></figure>

The speed reducer block, located in the **OPAL-RT SPS Software/Electrical Machines/Control/Shafts and Speed Reducers** library, outputs torques after speed reduction. It is represented by the following high‑level schematic, consisting of three main components: a high‑speed shaft, a reduction device, and a low‑speed shaft. More details on the shaft model are included in the [Mechanical Shaft](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/blocks-functions-tools/machines/blocks/machines-control/shafts-and-speed-reducers/mechanical-shaft.md) block pages.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-8236314cd623b19e5696072701d248e125f73a10%2Fspeed_reducer_hight_level_schem.png?alt=media" alt=""><figcaption><p>High-Level Schematic</p></figcaption></figure>

The next figure shows the Simulink® schematic of the speed reducer model.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-2271a4b2f4726731c7945c70d4207d2a02a71803%2Fspeed_reducer_simulink_schem.png?alt=media" alt=""><figcaption><p>Simulink schematic</p></figcaption></figure>

### Reduction Device <a href="#reduction-device" id="reduction-device"></a>

The reduction device dynamics are governed by the following equation:

$$
J\_{rdh} \ddot{\theta}\_{rdh}=T\_h-\dfrac{T\_l}{\eta i'}\\\[8pt]
$$

where $$J\_{rdh}$$ is the inertia of the reduction device with respect to the high-speed side, $$\ddot{\theta}\_{rdh}$$ is the acceleration of the high-speed side of the reduction device, $$T\_h$$ is the torque transmitted by the high-speed shaft to the input of the reduction device, $$T\_l$$ is the torque transmitted by the low-speed shaft from the output of the reduction device, $$\eta$$ is the efficiency of the reduction device, and $$i$$ is the reduction ratio ( $$i ≥1$$ ).

For reduction devices composed of gears, the efficiency varies according to the type of gears, the number of stages (thus the reduction ratio), the lubricant, etc. For small reduction ratios, the efficiency can climb up to 95%. For higher reduction ratios, the efficiency can be as low as 75%. However, most commercial speed reducers now have high efficiencies of 90% to 95%.

The output speed $$N\_{rdl}$$ (the speed of the driving side of the low-speed shaft) of the reduction device is given by the following equation:

$$
N\_{rdl}=\frac{N\_{rdh}}{i} \\\[8pt]
$$

where $$N\_{rdh}$$ is the input speed of the reduction device (the speed of the loaded side of the high-speed shaft).

The following figure shows the reduction device schematic.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-d2406fdb3165a22caf6082609832e80263fc90e9%2Fspeed_reducer_device_schem.png?alt=media" alt=""><figcaption></figcaption></figure>

The stiffness of the shafts must be high enough to avoid large angular deflections that could cause misalignment inside the bearings and damage.

Keep in mind that the low-speed shaft will have a higher stiffness and a higher damping factor than the high-speed shaft, the torque on the low-speed shaft being a lot bigger. For proper simulation results, the damping factor of both shafts must be high enough to avoid undesired transient speed and torque oscillations.

Too high stiffness and damping factor values or too low gearbox inertias can cause simulation errors.

The model is discrete. Good simulation results have been obtained with a 1 µs time step.

### Model Specifications <a href="#model-specifications" id="model-specifications"></a>

The library contains four preset models. The specifications of these speed reducer models are shown in the following table.

**Preset Speed Reducer Models**

|                              | 1st | 2nd  | 3rd   | 4th    |
| ---------------------------- | --- | ---- | ----- | ------ |
| **Power (hp)**               | 5   | 5    | 200   | 200    |
| **Reduction ratio**          | 10  | 100  | 10    | 100    |
| **Max. output torque (N.m)** | 300 | 3000 | 12200 | 122000 |

The high-speed and low-speed shafts of the preset models have been designed in order to present 0.1 degrees of angular deflection at maximum torque.

## Parameters <a href="#parameters" id="parameters"></a>

<table data-header-hidden><thead><tr><th width="220.22222900390625"></th><th></th></tr></thead><tbody><tr><td><strong>Preset model</strong></td><td>This pop-up menu allows you to choose preset model parameters. When you select a preset model, the other block parameters become inaccessible.<br>Default is 01: 5 HP — i = 10 — Tlmax = 300 N.m.</td></tr><tr><td><strong>Reduction ratio</strong></td><td>The reduction ratio of the speed reducer (<em>i</em>≥ 1). Default is 10.</td></tr><tr><td><strong>Reduction device inertia</strong></td><td>The inertia of the reduction device with respect to the high-speed side (kg.m2). Default is 0.0005.</td></tr><tr><td><strong>Efficiency</strong></td><td>The efficiency of the reduction device. Default is 0.95.</td></tr><tr><td><strong>High-speed shaft stiffness</strong></td><td>The stiffness of the high-speed shaft (N.m). Default is 17190.</td></tr><tr><td><strong>High-speed shaft damping</strong></td><td>The internal damping of the high-speed shaft (N.m.s). Default is 600.</td></tr><tr><td><strong>Low-speed shaft stiffness</strong></td><td>The stiffness of the low-speed shaft (N.m). Default is 171900.</td></tr><tr><td><strong>Low-speed shaft damping</strong></td><td>The internal damping of the low-speed shaft (N.m.s). Default is 6000.</td></tr></tbody></table>

## Inputs <a href="#inputs" id="inputs"></a>

<table data-header-hidden><thead><tr><th width="220.22222900390625"></th><th></th></tr></thead><tbody><tr><td><strong>Nh</strong></td><td>Speed (rpm) of the driving end of the high-speed shaft.</td></tr><tr><td><strong>Nl</strong></td><td>Speed (rpm) of the loaded end of the low-speed shaft.</td></tr></tbody></table>

## Outputs <a href="#outputs" id="outputs"></a>

<table data-header-hidden><thead><tr><th width="220.22222900390625"></th><th></th></tr></thead><tbody><tr><td><strong>Th</strong></td><td>Torque transmitted by the high-speed shaft to the reduction device.</td></tr><tr><td><strong>Tl</strong></td><td>Torque transmitted by the low-speed shaft to the load.</td></tr></tbody></table>

### Examples <a href="#examples" id="examples"></a>

The [Speed Reducer Example](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/motor-drives/speed-reducer.md) (reducer\_example) example illustrates the speed reducer model.

### References <a href="#references" id="references"></a>

\[1] Norton, Robert L., *Machine Design*, Prentice Hall, 1998.

\[2] Nise, Norman S., *Control Systems Engineering*, Addison-Wesley Publishing Company, 1995


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/blocks-functions-tools/machines/blocks/machines-control/shafts-and-speed-reducers/page-9.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
