> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/blocks-functions-tools/power-converters/switches/igbt-diode.md).

# IGBT/Diode

## Description

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-c3a2d3c00174ca6ad27abae36b44b83eb50efffc%2FIGBT_diode_block.png?alt=media" alt=""><figcaption></figcaption></figure>

The **IGBT/Diode** bloc&#x6B;**,** located in the **OPAL-RT SPS Software/Power Electronics** library, is a simplified mode of an IGBT (or GTO or MOSFET)/Diode pair where the forward voltages of the forced-commutated device and diode are ignored.

## Ports

### Input

<table><thead><tr><th width="254">Port</th><th>Description</th></tr></thead><tbody><tr><td><strong>g</strong> — Device control signal (Simulink signal)</td><td>Simulink signal to control the opening and closing of the device.</td></tr></tbody></table>

### Output

<table><thead><tr><th width="258.7999267578125">Port</th><th>Description</th></tr></thead><tbody><tr><td><strong>m</strong> — Switch output (Simulink signal)</td><td><p>The Simulink output of the block is a vector containing two signals. You can demultiplex these signals by using the Bus Selector block provided in the Simulink library.<br>1- IGBT/Diode current (A)<br>2- IGBT/Diode voltage (V)<br><strong>Dependencies</strong></p><p>To enable this port, select the <strong>Show measurement port</strong> parameter.</p></td></tr></tbody></table>

### Conserving

<table data-header-hidden><thead><tr><th width="256.00006103515625">Port</th><th>Description</th></tr></thead><tbody><tr><td><strong>C</strong> — IGBT collector (SPS electrical)</td><td>SPS electrical conserving port associated with the IGBT/Diode collector.</td></tr><tr><td><strong>E</strong> — IGBT emitter (SPS electrical)</td><td>SPS electrical conserving port associated with the IGBT/Diode emitter.</td></tr></tbody></table>

## Parameters

<table data-header-hidden><thead><tr><th width="267">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Internal resistance Ron</strong> — Internal resistance of IGBT<br>1e-3 (default) | nonnegative scalar</td><td>Internal resistance of the device, in ohms (Ω).</td></tr><tr><td><strong>Snubber resistance Rs</strong> — Snubber resistance 1e5 (default) | nonnegative scalar</td><td>Snubber resistance, in ohms (Ω). Set the <strong>Snubber resistance Rs</strong> parameter to inf to eliminate the snubber from the model.</td></tr><tr><td><strong>Snubber capacitance Cs</strong> — Snubber capacitance<br>inf (default) | nonnegative scalar</td><td>Snubber capacitance in farads (F). Set the <strong>Snubber capacitance Cs</strong> parameter to 0 to eliminate the snubber, or to inf to get a resistive snubber.</td></tr><tr><td><strong>Show measurement port</strong> — Option to show measurement port<br>on (default) | off</td><td>If selected, add a Simulink output to the block returning the diode IGBT current and voltage.</td></tr></tbody></table>

## Assumptions and Limitations

* The IGBT/Diode block implements a macro model of the real IGBT and Diode devices. It does not take into account either the geometry of the devices or the complex physical processes \[1].
* The IGBT/Diode block cannot be connected in series with an inductor, a current source, or an open circuit, unless its snubber circuit is in use.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/blocks-functions-tools/power-converters/switches/igbt-diode.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
