> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/cassie-and-mayr-arc-models-for-a-circuit-breaker.md).

# Cassie and Mayr Arc Models for a Circuit Breaker

This example shows the use of the Cassie and Mayr arc model for simulating high voltage circuit breaker interruption.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-c6bee51b70a63cbc9a8f19a68ffcb1521c705974%2Fcassie_mayr_arcmodel_circuit_breaker.png?alt=media" alt=""><figcaption></figcaption></figure>

## Description

Two identical circuits are displayed: one with a Cassie and one with a Mayr arc model. The circuit is a simple representation of a circuit breaker interrupting a short-line fault.

* At the source side of the circuit breaker a circuit is present for reproducing a (2-parameter IEC) transient recovery voltage (TRV).
* The RLC circuit at the line side represents a short transmission line that is short-circuited.

{% hint style="info" %}
Recommended: use a stiff solver because of the nonlinear behavior of the arc.
{% endhint %}

## Simulation

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-0b34abda95a6dc3a4e19dcd3a674877a6a452366%2Fcassie_mayr_arcmodel_simul.png?alt=media" alt=""><figcaption><p>Voltage comparisons for the Cassie and Mayr arc models.</p></figcaption></figure>

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-4616cd0d144f44c2629705a9cc7de941f37f0319%2Fimage.png?alt=media" alt=""><figcaption><p>Current comparisons for the Cassie and Mayr arc models.</p></figcaption></figure>

Observations from the simulation:

* The arc behaves as a non-linear resistance; therefore both arc current and voltage pass the zero value at the same time.
* As the power input into the arc channel is zero at that time, the current zero crossing is the place where the interruption takes place.
* The Cassie arc model has a constant arc voltage in the high-current interval, while the Mayr arc model shows an increasing arc voltage (the extinction peak) close to the current zero crossing.
* The Cassie arc model fails to interrupt the short-circuit current.
* The Mayr arc model interrupts and shows a small post-arc current of 0.6 A immediately after the current zero crossing. This current is caused by the transient recovery voltage building up over the non-infinite arc resistance.
* In the successful interruption case (Mayr), the TRV builds up over the breaker. This voltage consists of the 2-parameter TRV and the high-frequency voltage oscillation of the line side (visible when zooming in).

{% hint style="danger" %}
This model cannot be run in accelerator mode due to modeling constraints.
{% endhint %}

## Command

Example model name: power\_arcmodels

{% code lineNumbers="true" %}

```matlab
open('power_arcmodels')
```

{% endcode %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/cassie-and-mayr-arc-models-for-a-circuit-breaker.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
