> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/single-phase-dynamic-load-block.md).

# Single Phase Dynamic Load Block

This example shows a single-phase dynamic load block built with Simulink® blocks.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-9441985e30e84ba0cf4ed87f3e7fbeb5a9c34891%2Fsingle-phase_dynamic_load_block.png?alt=media" alt=""><figcaption></figcaption></figure>

## Description

Look under the mask of the custom-built Single-Phase Dynamic Load block and observe the three systems. The "Measurement System" consists of the voltage measurement blocks which convert the SPS signal into Simulink signals. The "Simulink System Model" contains the core functionality of the Single-Phase Dynamic Load block. Lastly, the "Current Injection System" contains the controlled current source blocks which convert Simulink signals into SPS signals.

In general, measurement blocks (voltage/current/impedance) serve as an interface between SPS and Simulink, and controlled source blocks (voltage/current) between Simulink and SPS. This is the recommended template for interfacing custom-built blocks in Simulink with SPS.

## Limitations

1. The Single-Phase Dynamic Load block is modeled as a current source, it cannot be connected to an inductive network, or to another current source. Therefore, a small resistive load (10 Kw) has been added in parallel with the dynamic load.
2. The Machine Initialization tool and the Load Flow tool of Powergui block cannot be used to initialize the Single-Phase Dynamic Load model.
3. The Single-Phase Dynamic Load block cannot be used with the Phasor simulation type mode of the Powergui.

## Command

Example model name: power\_1phdynamicload

{% code lineNumbers="true" %}

```matlab
open('power_1phdynamicload')
```

{% endcode %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/single-phase-dynamic-load-block.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
