> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/single-phase-energization-of-a-three-phase-line.md).

# Single-Phase Energization of a Three-Phase Line

This example shows transients obtained with a distributed parameter line model and a PI section line model.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-4f53d9088880d41ba2293c6bc0caf760d527c54a%2Fimage.png?alt=media" alt=""><figcaption></figcaption></figure>

## Description

A 100 km, three-phase line is energized on a 735 kV, 30,000 MVA equivalent network. The line is first energized on phase A at t = 1/4 cycle (maximum of source voltage) and then deenergized at t = 4 cycles. Phase B and phase C are left open. Switchings are performed simultaneously on two different line models:

* Distributed parameter line
* Three-phase PI section line consisting of two 50 km sections

Voltages obtained on phases A and B at the line receiving end with the two models are compared.

## Simulation

{% stepper %}
{% step %}

### Start the simulation

Open the two scopes and start the simulation.
{% endstep %}

{% step %}

### Compare waveforms

Compare the voltages obtained on phase A and phase B (induced voltage) with the two models.
{% endstep %}

{% step %}

### Inspect transients

Zoom on voltages right after energizing and notice the sharp edges obtained with the distributed parameter line (yellow trace). These voltage steps, which are due to travelling wave reflections at both ends of the line, are filtered by the PI model. Notice also that phases A and B stay charged at peak voltage when the breakers are opened.
{% endstep %}
{% endstepper %}

{% hint style="info" %}
The distributed parameter line model shows sharp transient steps due to travelling wave reflections; the PI section model smooths these features.
{% endhint %}

## Command

Example model name: power\_triphaseline

{% code lineNumbers="true" %}

```matlab
open('power_triphaseline')
```

{% endcode %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/single-phase-energization-of-a-three-phase-line.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
