> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/steady-state-analysis-of-a-linear-circuit.md).

# Steady-State Analysis of a Linear Circuit

This example shows the use of the powergui and Impedance Measurement blocks to analyze the steady-state operation of a linear electrical circuit.

<figure><img src="https://799605156-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdlNg8IbOdahCpFCyzxSN%2Fuploads%2Fgit-blob-800e629b78b312baf363621e10a6b8d1b51488f0%2Fimage.png?alt=media" alt=""><figcaption></figcaption></figure>

## Description

A 5th harmonic filter is connected at a bus bar fed by a 60 Hz, 100 V inductive source. A 5th harmonic (300 Hz, 1 A) current is injected at the bus bar.

This linear system consists of 3 states (2 inductor currents and 1 capacitor voltage), 2 inputs (Vs, Is) and 2 outputs (Current and Voltage Measurement).

An Impedance Measurement block is used to compute the impedance versus frequency of the circuit.

## Simulation

{% stepper %}
{% step %}

### Use powergui to find steady-state phasors

Use the powergui block to find the steady-state 60 Hz and 300 Hz components of voltage and current phasors. The values of the 3 states (phasors and initial values) can also be obtained from the powergui block.
{% endstep %}

{% step %}

### Start the simulation and open Impedance measurement

Open the scope and start the simulation from the Simulation/Start menu. Notice that the simulation starts in steady-state. Using the powergui block, select Impedance vs Frequency Measurement. A new window opens.
{% endstep %}

{% step %}

### Perform the impedance measurement and display results

The measurement will be performed for the specified frequency range vector \[0: 2:1000] (0 to 1000 Hz by steps of 2 Hz). Click on the Display button. The impedance is displayed in a graphic window. Notice the series resonance at 300 Hz corresponding to the tuned frequency of the filter.
{% endstep %}
{% endstepper %}

## Command

Example model name: power\_filter

{% code lineNumbers="true" %}

```matlab
open('power_filter')
```

{% endcode %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/get-started-with-sps/steady-state-analysis-of-a-linear-circuit.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
