> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/overview/sps-bibliography.md).

# SPS-bibliography

## Bibliography

\[1] Boldea, Ion, and S.A. Nasar. *Electric Drives*. Boca Raton, Florida: CRC Press, 1999.

\[2] Bose, B. K. *Modern Power Electronics and AC Drives*. Upper Saddle River, NJ: Prentice-Hall, 2002.

\[3] Casoria, S., P. Brunelle, and G. Sybille. “Hysteresis Modeling in the MATLAB/Power System Blockset.” Electrimacs 2002, École de technologie supérieure, Montreal, 2002.

\[4] Dommel, H. “Digital Computer Solution of Electromagnetic Transients in Single and Multiple Networks.” **IEEE® Transactions on Power Apparatus and Systems**. Vol. PAS-88, No. 4, April, 1969.

\[5] Frame, J.G., N. Mohan, and Tsu-huei Liu. “Hysteresis modeling in an Electro-Magnetic Transients Program.” IEEE PES winter meeting, New York, January 31 to February 5, 1982.

\[6] Grelet, G. and G. Clerc. **Actionneurs électriques**. Paris: Éditions Eyrolles, 1997.

\[7] Grenier, D., L.-A. Dessaint, O. Akhrif, Y. Bonnassieux, and B. LePioufle. “Experimental Nonlinear Torque Control of a Permanent Magnet Synchronous Motor Using Saliency.” *IEEE Transactions on Industrial Electronics*. Vol. 44, No. 5, October 1997, pp. 680–687.

\[8] Grondin, R., I. Kamwa, L. Soulieres, J. Potvin, and R. Champagne. “An approach to PSS design for transient stability improvement through supplementary damping of the common low frequency.” *IEEE Transactions on Power Systems*, 8(3), August 1993, pp. 954–963.

\[9] Harunur, M. R. *Power Electronics*. Upper Saddle River, NJ: Prentice-Hall, 1988.

\[10] Hingorani, N. G. and L. Gyugyi. “Understanding FACTS; Concepts and Technology of Flexible AC Transmission Systems.” *IEEE Press book*, 2000.

\[11] Krause, P. C. *Analysis of Electric Machinery*. New York: McGraw-Hill, 1986.

\[12] Krause, P. C., O. Wasynczuk, and S. D. Sudhoff. *Analysis of Electric Machinery*. IEEE Press, 2002.

\[13] Kundur, P. *Power System Stability and Control*. New York: McGraw-Hill, 1994.

\[14] Mohan, N., T. M. Undeland, and W. P. Robbins. *Power Electronics: Converters, Applications, and Design*. New York: John Wiley & Sons, 1995.

\[15] Nise, Norman S. **Control Systems Engineering**. Addison-Wesley Publishing Company, 1995.

\[16] Norton, Robert L. **Machine Design**. Upper Saddle River, NJ: Prentice Hall, 1998.

\[17] Rajagopalan, V. *Computer-Aided Analysis of Power Electronic Systems*. New York: Marcel Dekker, 1987.

\[18] “Recommended Practice for Excitation System Models for Power System Stability Studies.” *IEEE Standard 421.5,* 2002.

\[19] Séguier, Guy. *Electronique de puissance*. Paris: Dunod, 1999.

\[20] Sen, P.C. *Thyristor DC Drives*. New York: John Wiley & Sons, 1981.

\[21] Shepherd, C. M. “Design of Primary and Secondary Cells - Part 2. An equation describing battery discharge.” Journal of Electrochemical Society. Volume 112, Jul. 1965, pp. 657–664.

\[22] Tremblay, O. *Modélisation, simulation et commande de la machine synchrone à aimants à force contre-électromotrice trapézoïdale*. École de Technologie Supérieure, 2006.

\[23] Tremblay, O., Dessaint, L.-A., Dekkiche, A.-I. “A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles.” *Vehicle Power and Propulsion Conference, 2007. VPPC 2007. IEEE* 9–12 Sept. 2007, pp. 284–289.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/smart-power-simulation-software-sps/overview/sps-bibliography.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
