Knowledge Base
Welcome to OPAL-RT’s Knowledge Base
OPAL-RT offers a repository of support information for optimal use of its technology.
Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.
For optimal experience, use a desktop computer.
Reference Number: AA-01378// Views: AA-01378// Created: 2018-01-24 21:03:10// Last Updated: 2022-11-17 19:03:52 Q&A HYPERSIM - Can you change the nominal voltage of multiple buses at the same time in HYPERSIM? QuestionCan you change the nominal voltage of multiple buses at the same time in HYPERSIM? AnswerYes, it's possible. We will look at an example model (Cigre3). 1. Open your model in HYPERSIM 2.Click on Analyze (HYPERSIM>Network>Analyze) 3.Click on Netlist (HYPERSIM>Network>Netlist) 4.In Category, select "Load Flow Parameters" and Components "All" 5.Click on Buses 6.On the Nominal Voltage column, you can change each individual values to what you want. You can also copy paste the values. 7.Close the window and click Analyze as in step 2. If the above steps were followed, all the buses will have the Nominal Voltage changed to the values set in the Netlist window. |