Support : Knowledge base

Knowledge Base

Welcome to OPAL-RT’s Knowledge Base

OPAL-RT offers a repository of support information for optimal use of its technology.

Loading…

Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.

For optimal experience, use a desktop computer.

Reference Number: AA-02066// Views: AA-02066// Created: 2022-02-10 22:37:32// Last Updated: 2023-07-12 16:50:16
HowTo
How to uncrate / unpack and set your cabinet / rack upright

Instructions to open the wooden crate

IMPORTANT: Please do not try to take the bench alone by yourself for safety reasons.

Time Required : 30 min

Number of People Required: One person for Steps 1-3, whereas, Steps 4-6 may require several persons.

Tools Required: Drill with appropriate bit (Phillips or Robertson head)

Step 1
Remove wooden Screws from Top Panel and Side Panel
Tools Required: Drill + proper bit tip (usually Phillips or Robertson Square)


Step 2
Remove the top panel and the panel on the side where the wheels are present.



Step 3
Assemble the four wheels that came with your test bench


Step 4
Carefully slide the cabinet towards the removed side panel
NOTE: This step might require several persons.




Step5
Attach an overhead crane to the four (4) hooks that are on the top of the bench that Opal supplied.



OR

Please check the weight of the cabinet mentioned in the commercial invoice and/or packing slips sent with the test bench.
Note that if you do not have a crane and plan to set up the test bench manually, you would have to assess the number of people needed to lift the test bench in a safe manner.
Using an overhead crane is recommended and manual lifting of the test bench would be done at your own risk.
OPAL-RT will not be liable for any damages incurred during the uncrating, lifting up, installation and set up of any test bench, regardless of the method employed, i.e. overhead crane or manual lifting.

Carefully lift the cabinet into vertical position. (This would require several persons, please check the weight as mentioned above and make an assessment at your own risk)


Step 6
Once the bench is safely secured to the overhead crane, you could slowly pull up the bench until it’s in a vertical position.
Roll the bench to your desired location




NOTE: To repack the cabinet, please follow the instructions described above in the reverse order.