Knowledge Base
Welcome to OPAL-RT’s Knowledge Base
OPAL-RT offers a repository of support information for optimal use of its technology.
Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.
For optimal experience, use a desktop computer.
Reference Number: AA-02104// Views: AA-02104// Created: 2022-10-21 03:20:05// Last Updated: 2023-04-06 18:05:38 HowTo Veristand Power Electronics Add On: Offline Installation Procedure This article demonstrates the procedure of off-line Power electronics add on installation. Introduction First of all, the offline installation package should be found on NI website FPGA-Based Power Electronics Add-On for VeriStand Download - NI, where should be checked first. However, the offline installation package is currently not available to download. And for version before 2019, there is no offline installation package. Thus, it is suggested to follow the procedure shown in the following. This procedure aims to help the end user for installing power electronics add on V1.12 with Veristand 2018 installed already. Prerequisites: Another computer that has power electronics add on installed (the version same as the power electronics add on to be installed on the offline target host computer). If the computer with power electronics add on installed is not available, please contact our support OPAL-RT Technical Support Team is Here for You, · Veristand 2018 (assume to have been installed) Power Electronics add on standalone packages:
Procedure: Note: the procedure is referred BUT modified from the steps on knowledge.ni.com:
2. Run CMD windows as administration and make "feed" by entering: cd C:\Program Files\National Instruments\NI
Package Manager
nipkg.exe feed-create
"C:\feeds\foldername" 3. Open NI Package Manager and set up feeds for two packages This can be followed by Installation - Power Electronics Add-On for NI VeriStand Documentation - Wiki OPAL-RT step 2. Add the OPAL-RT Power Electronics Add-On Feed.
4. Install the package (the license package is installed at background) and done Verification: Open the Veristand and the Power Electronics Add-On is successfully installed. |