IEEE C37.118 Slave
Our IEEE C37.118 Slave I/O interface enables the creation of multiple IEEE C37.118 slave sessions to report data to an IEEE C37.118 master, typically a Phasor Data Concentrator (PDC). Built to IEEE Std C37.118.2-2011 specifications, this IEEE C37.118 protocol integrates seamlessly into any simulation model using a standard network interface card.
The driver supports IEEE master slave communication and features an asynchronous TCP/IP communication interface and IP aliasing, allowing each slave instance to have its own IP address—even when using a single physical network interface.
About IEEE C37.118
C37.118 is the IEEE Standard for Synchrophasor Measurements in Power Systems, defining synchrophasor, frequency, and rate of change of frequency (ROCOF) measurements under all operating conditions. The standard outlines methods for evaluating these measurements and sets compliance requirements for both steady-state and dynamic conditions.
RESOURCES
Product guide
Explore our communication protocols, browse product lists, and access user documentation.
FAQ
Find the answers to your questions
What is the IEEE C37.118 Slave interface and how does it work?
The IEEE C37.118 Slave interface allows users to create multiple slave sessions that report synchrophasor data to an IEEE C37.118 master, such as a Phasor Data Concentrator (PDC). It supports the IEEE C37.118 protocol and integrates into real-time simulations using a standard network interface card.
Is the IEEE C37.118 Slave interface compliant with the IEEE C37.118 standard?
Yes, the interface is built to meet IEEE C37.118.2-2011 specifications, ensuring full compliance with the IEEE C37.118 standard for synchrophasor measurements in power systems.
Can I simulate IEEE master slave configurations using this interface?
Absolutely. The IEEE C37.118 Slave driver enables simulation of IEEE master slave architectures by supporting multiple slave instances that communicate asynchronously with a master via the IEEE C37.118 protocol.
What platforms are compatible with the IEEE C37.118 Slave interface?
The IEEE C37.118 Slave I/O interface is fully compatible with both RT-LAB and HYPERSIM platforms, allowing real-time testing and validation of the IEEE C37.118 protocol in diverse simulation environments.
Does this interface support features from IEEE C37.118.1?
Yes, the IEEE C37.118 Slave interface supports functionalities relevant to IEEE C37.118.1 by enabling synchrophasor data reporting under both steady-state and dynamic operating conditions, in line with the IEEE C37.118 standard.
Need technical support?
We’re dedicated to helping you maximize the potential of your system. Visit the support center to explore our extensive support resources, or request personalized help to keep your system running smoothly.