Blog
Discover articles on real-time simulation, industry trends, and emerging technologies across key engineering sectors.
Power Electronics
09 / 30 / 2026
FPGA simulation for power electronics and motor drives
A technical comparison of CPU and FPGA solver architectures for power electronics and motor drive simulation, covering the timestep each reaches and how to split a model between them.
Power Electronics
09 / 29 / 2026
How to model and control a T-type three level inverter
An engineering overview of the T-type three level inverter leg, covering how it reaches three voltage levels, where device stress lands, and how neutral point balancing and modulation shape control.
Simulation
09 / 28 / 2026
How CHIL signal-level testing validates embedded controllers
A practical look at signal level controller hardware in the loop testing, covering I/O ranges, sensor emulation, latency and the setup checks that make embedded controller results trustworthy.
Power Electronics
09 / 26 / 2026
Field oriented control explained for motor drive engineers
A technical walkthrough of field oriented control for PMSM drives, covering reference frame rotations, rotor angle accuracy, current loop tuning, field weakening and real-time validation.
Automotive
09 / 23 / 2026
Electric motor simulation for drive development teams
A practical look at how drive development teams apply electric motor simulation and power-level emulation alongside dynamometer testing.
Energy
09 / 21 / 2026
Battery modeling approaches for EV and grid storage validation
An overview of equivalent circuit and electrochemical battery modelling approaches and how fidelity, ageing and thermal coupling shape EV and grid storage validation.
Microgrid
09 / 19 / 2026
Hybrid AC-DC microgrid emulation with power hardware-in-the-loop
An examination of how hybrid AC-DC microgrid stability is set at the interlinking converter and why power hardware in the loop is required to test that boundary at full power.
Power Electronics
09 / 17 / 2026
BLDC motor control fundamentals with simulation examples
A technical primer on six step BLDC commutation, Hall sensor and sensorless back EMF position sensing, torque ripple at each switching instant, and the simulation exercises a teaching lab can run.
Power Systems
09 / 16 / 2026
How to build a protection relay testing workflow utility engineers trust
A practical look at how utility engineers build protection relay testing workflows, from secondary injection through closed loop validation against a real time power system model.
Power Electronics
09 / 12 / 2026
Capturing GaN switching transients in real time converter models
A technical look at how timestep selection, solver architecture and model partitioning decide how much of a GaN switching transient a real time converter model actually reports.
Still need help?
Please contact us for more details or any inquiries. Our local team of experts will be pleased to promptly answer any of your questions.