Seamless hardware interfaces for integrated systems

Select the right interfaces for seamless integration between your hardware and our simulation platforms. Ensure that you include the right connectivity, protocols, and configurations that ensure accurate and reliable communication between components, supporting the development and testing of advanced technologies.

Contact us Discover our products

<p>Seamless <em>hardware interfaces</em> for integrated systems</p>

Categories

Building bridges: essential hardware interface solutions

 

Explore the foundational components that bridge the gap between simulation platforms and physical systems. Our hardware interfaces encompass modular SLSC modules, high-performance I/O cards, signal conditioning solutions, and mapping & I/O adapters. Each category is designed to enhance system integration, ensure accurate data processing, and simplify connections for efficient and reliable testing. Navigate through these categories to find the tools that best suit your needs and optimize your hardware setup.

 

SLSC modules

I/O cards

Signal conditioning

Mapping & I/O adapters

Image du module texte image accordion
Image du module texte image accordion
Image du module texte image accordion
Image du module texte image accordion
Type
Subtype
Display 
OP4855 XYON

AV Sensor Interface

OP4855 XYON

High-performance autonomous sensor interface enabling direct camera ECU testing with advanced image manipulation, eliminating OTA limitations for comprehensive, reliable validation.

OP48H10

32-channel Fast I/O Module for OP481x-IO Series

OP48H10

32 configurable digital I/O module for OP481x-IO Series. 16 fast AI, 16 fast AO, sampling up to 10 MSPS, signal up ±10 V

OP48H20

64-channel I/O Module for OP481x-IO Series

OP48H20

DIO and AIO module OP481x-IO Series. 16 DI, 16 DO, 8 standard AI, 24 standard AO, sampling up to 2 MSPS, signal up ±10 V

OP48H30

128-channel I/O Module for OP481x-IO Series

OP48H30

64 configurable digital inputs or outputs, 16 analog inputs and up to 48 analog outputs, sampling up to 2 MSPS on 16 bits, 5-30 V DIO, ±10 V AIO.

OP5330

16-channel Analog Output Module - 1 or 2 MS/s

OP5330

16 single-ended analog output channels sampled at 1 MS/s or 8 single-ended analog output channels sampled at 2 MS/s, and produces values up to ±16V.

OP5340

16-channel Analog Input Module - 400kS/s

OP5340

16 differential analog input channels, sampled at up to 400 kS/s, for measuring ±20V input signals at 16-bit resolution

OP5342

16-channel Analog Input Module - 2 MS/s

OP5342

16 differential analog input channels, sampled at up to 2 MS/s, for measuring input signals up to ±20 V at 16-bit resolution.

OP5360

32-channel Digital Output Module

OP5360

32 digital outputs organized into two banks of 16 channels each. Push-pull, galvanic isolation, output signals of 5-15 V or 5-30 V.

OP5367

32-channel Digital I/O Module

OP5367

32 digital I/O board. The output channels are operating at 5 V (CMOS/TTL) or 3.3 V (LVTTL) and the input channels are high impedance with programmable high and low thresholds.

OP5369

32-channel Digital I/O Module

OP5369

32 digital I/O board. Allows for programming of 4 banks of 8 DIO channels respectively. DIN channel voltage range is from 0 V to 30 V and the DOUT channel voltage range is from 4.5 V to 25 V.

OP8120 MSCC Series

Modular Signal Conditioning Chassis

OP8120 MSCC Series

High power pre- and post-conditioning chassis (amplifier) for OPAL-RT standard analog and digital I/O boards.

OP8210

Interface Connector Modules

OP8210

Rackmount hardware interface (RJ45, BNC, Screw Terminal) for DB37 connections.

FAQ

Find the answers to your questions

How do I access support as an existing customer?