Energy
Microgrid, Energy
05 / 18 / 2026
Battery energy storage system testing that grid operators trust
This piece explains how utilities validate a battery energy storage system through acceptance criteria, closed-loop testing, commissioning, protection checks, duration tests, and traceable evidence.
Industry applications, Simulation, Energy
03 / 29 / 2026
Validating data center energy management systems using real-time HIL
This piece explains how AI workload variability affects data centre power stability and how closed-loop HIL testing helps validate EMS control behaviour under site and grid stress.
Industry applications, Power Systems, Simulation, Energy
03 / 01 / 2026
How hyperscale data centers behave as inverter-based loads
This piece explains how hyperscale data centers interact with the grid as inverter based loads and why accurate EMT models need converter controls, ride-through logic, and facility architecture.
Energy
02 / 22 / 2026
5 Ways Accelerated Simulation Enhances Energy Projects
Covers how accelerated simulation supports energy simulation for siting and sizing, inverter and protection validation, grid-code checks, interoperability risk, and cost control across planning, design, and commissioning.
Energy
02 / 13 / 2026
6 Benefits Of Rapid Control Prototyping For Automotive And Energy Projects
Covers where rapid control prototyping fits in automotive and energy validation, outlines six practical benefits, compares RCP with MIL, SIL, and HIL, and explains setup needs and selection criteria.
Energy
02 / 10 / 2026
Top 10 Energy Simulation Tools For Renewable Projects
Compares 10 energy simulation tools and microgrid simulation software options and explains how to match them to renewable project planning, grid studies, and control validation.
Energy
02 / 03 / 2026
Power Hardware In The Loop Test Bench Guide For Energy Systems
Explains power hardware in the loop testing for energy systems, covering PHIL test bench operation, interface and protection choices, build and validation workflow, common failure modes, and when to use PHIL instead of CHIL or offline simulation.
Simulation, Microgrid, Energy
01 / 15 / 2026
Energy simulation guide for renewable grids and microgrids
Energy simulation and microgrid simulation methods for renewable grids, focusing on scope, model fidelity, time resolution, variability scenarios, and using results to set limits.
Energy, Simulation
01 / 08 / 2026
Why PHIL testing is critical for safe energy innovation
Explains how PHIL testing validates power hardware, control, and protection in a closed loop to reduce safety risk before grid connection.
Energy
01 / 08 / 2026
8 HIL test cases every electrification team should automate
Guidance for selecting and automating HIL test cases for electrification testing across sequencing, faults, sensors, PWM limits, multiphase machines, thermal derating, communications, and timing.