Simulation
Simulation
05 / 15 / 2026
Cyber-physical systems simulation for critical infrastructure validation
A guide to validating cyber-physical systems for critical infrastructure through closed-loop simulation, sensor modelling, embedded systems testing, and power grid protection studies.
Simulation
05 / 14 / 2026
How to meet IEEE 1547 requirements for DER interconnection
This piece explains how to meet IEEE 1547 and IEEE 1547-2018 requirements for DER interconnection through type testing, ride-through validation, anti-islanding checks, bench setup, and site verification.
Simulation, Microgrid
05 / 13 / 2026
Grid modernization and where real-time simulation fits the roadmap
A practical guide to grid modernization that explains how utilities rank stability risks, choose simulation tools, and use real-time validation before deployment.
Simulation
05 / 12 / 2026
Model-based design for real-time simulation engineers
A practical guide to model-based design, model-based systems engineering, Simulink deployment, HIL workflow timing, and validation traceability for automotive teams.
Simulation
05 / 11 / 2026
How real-time simulation prevents AI data center power failures
A close look at how real-time simulation helps engineers validate AI data centre power, test GPU load swings, and check protection and backup timing before deployment.
Simulation
05 / 06 / 2026
ADAS testing and validation using real-time simulation platforms
This page explains how ADAS testing uses real-time simulation, lidar simulation, HIL, fault injection, and correlation to build approval-ready validation evidence.
Simulation
05 / 04 / 2026
How to validate protective relay settings with real-time simulation before commissioning
This guide explains how real-time simulation supports protective relay testing, distance relay setting verification, coordination checks, and lab validation before commissioning.
Simulation
05 / 01 / 2026
OPAL-RT at IEEE PES General Meeting 2026 in Montreal
A planning guide for IEEE PES General Meeting 2026 that focuses on scheduling, exhibitor evaluation, demos, panels, hospitality events, and follow-up after Montreal.
Power Systems, Simulation
04 / 17 / 2026
Why real-time simulation is critical for battery thermal management and safety validation
This piece explains why automotive teams use real-time simulation to validate battery thermal management, closed-loop control, and battery safety testing before full pack hardware is available.
Simulation, Power Systems
04 / 15 / 2026
8 Factors to consider when choosing real-time simulators for large-scale battery validation labs
A practical guide to selecting real-time simulators for battery safety testing labs, with focus on timing, model fidelity, faults, chamber integration, data, and scale.