Knowledge Base
Welcome to OPAL-RT’s Knowledge Base
OPAL-RT offers a repository of support information for optimal use of its technology.
Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.
For optimal experience, use a desktop computer.
Reference Number: AA-01545// Views: AA-01545// Created: 2018-10-16 18:57:42// Last Updated: 2020-05-04 17:56:09 OPAL-RT Hardware Installing an External PCI Card in an OP5600 Chassis OverviewThis article will explain the steps necessary to install an External PCI Card into an OP5600 Chassis. This procedure is required when adding an OP5607 Expansion Unit to an OP5600 HIL Simulator, if it does not have the External PCI Card already installed. WarningsThis procedures listed in this article involve opening your OP5600 unit to add additional hardware. This article assumes basic ESD and safety precautions will be followed, including proper use of an Anti-Static Bracelet. Additionally, opening your simulator without authorising OPAL-RT will result in voiding your warranty. If you did not receive an authorisation, including new warranty stickers, please contact OPAL-RT Support via the Support Center: https://www.opal-rt.com/contact-technical-support/ MaterialsPlease make sure to gather the following materials before starting: 1. External PCI Cable (To connect to PCI Accessory such as OP5607) 2. Internal PCI Cable (may differ slightly from one pictured) 3. Phillips #1 Screwdriver 4. PCI Retaining Clamp (optional) 5. External PCI Card 6. New Warranty Stickers Opening the OP5600
|