Knowledge Base

Welcome to OPAL-RT’s Knowledge Base

OPAL-RT offers a repository of support information for optimal use of its technology.

Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.

For optimal experience, use a desktop computer.

Reference Number: AA-01177 // Views: 3047 // Created: 2016-06-13 21:25:35 // Last Updated: 2017-12-27 20:10:33
General Article
HYPERSIM 6.0 License Configuration on Localhost and Target

HYPERSIM 6.0 License Configuration on Localhost and Target

The goal of this article is for the reader to understand how the license are configured in HYPERSIM 6.0. Please follow these two steps, 

1.Request and Install your localhost license. This is the license that will be for your Windows PC. 

  • There is an activation tool that helps you activated your license or request a license.
    • If you don't have a license, you will need to do the following,
      • Open HYPERSIM License Activation and Request a new license

      • Generate the machine information and Save to file

      • Send the machine id (machine_id.opal) via our website. 
    • If you already have a license, simply click on "Load a license file" and select the .bin file that you received from OPAL-RT Support Team.

The above steps allow you to activate your license on your localhost. This license allows you to open and edit models, run non-real-time simulation and view you result. Note that without your localhost license, you cannot open HYPERSIM 6.0. To activate the license on a Target.

2. Request and activate the license on your target/simulator. This is the license that will allow you to run real time. 

  • Open HYPERSIM 6.0 > Go into HYPERSIM tab > Tools>Target

    • If you don't have the license for your Target, 
      • Select the Licensing tab and copy the Machine ID and send to OPAL-RT Support

    • If you already have a license, simply click on "Install License" and   select the .bin file that you received from OPAL-RT Support Team. The license will be installed on your Target in /export/local/ssr/hyconfig 
    • Don't forget to click on the "Refresh" button, so that hy.server service is restarted.