Knowledge Base
Welcome to OPAL-RT’s Knowledge Base
OPAL-RT offers a repository of support information for optimal use of its technology.
Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.
For optimal experience, use a desktop computer.
Reference Number: AA-01392// Views: AA-01392// Created: 2018-02-12 14:38:11// Last Updated: 2018-02-12 14:38:11 HowTo HYPERSIM: How to create a DC Source in HYPERSIM? How To Create a DC Source in HYPERSIM?Unfortunately, there is no DC source in HYPERSIM, but there is a way to have one of the Network Source behave like a DC source. Here is how, 1. In the Library section in HYPERSIM, go into Network Sources section and select the Controlled V Source, 1-ph 2. Add the voltage source in HYPERSIM and do the following configuration. The configuration contains a floating point constant and a POW. 3.Select the sensor "cV1" ( Right click on the block and do select Open Sensor Form) 4.Open ScopeView and see the result. In this case, the constant was 5, therefore, we see 5V DC. |