Knowledge Base
Welcome to OPAL-RT’s Knowledge Base
OPAL-RT offers a repository of support information for optimal use of its technology.
Please note that OPAL-RT knowledge base is not fully optimized for mobile platforms.
For optimal experience, use a desktop computer.
Reference Number: AA-01540// Views: AA-01540// Created: 2018-10-11 18:55:00// Last Updated: 2018-10-11 19:10:33 Problem & Solution HPERSIM Linux crashes in mode Simulation ProblemWhen going from "Edition" to "Simulation" HYPERSIM Linux crashes Here is the error displayed in MobaXterm, [2018-08-14 13:55:38.627] Create temporary sensors... [2018-08-14 13:55:38.627] Create hypersim components... -------------------------------------------------------------------------------- Creating components of the network topology... -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Creation Factory report -------------------------------------------------------------------------------- Bus : 0 Sub-Systems : 0 Networks : 0 Blocks : 0 Simulinks : 0 Ports : 0 Inport : 0 Outport : 0 -------------------------------------------------------------------------------- [2018-08-14 13:55:38.627] Create hypersim connections... -------------------------------------------------------------------------------- Creating connections of the network topology... -------------------------------------------------------------------------------- [2018-08-14 13:55:38.627] Validate synchronisation - POW... [2018-08-14 13:55:38.629] Validate Topology... -------------------------------------------------------------------------------- Pre-Validation of Hypersim Topology -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- [2018-08-14 13:55:38.629] Clear temporary sensors... [2018-08-14 13:55:38.629] Topology ready... Topology ready - time sec=0, usec=2665 S imSession::interrupt(11) SimSession::sessionInterrupted(11) [2018-08-14 13:55:38.631] Abort session [IgSim aborted by signal [11]] Aborted [11] Network is saved under /home/hypusr01/NoName_1.sch Shutdown server RPC [0x3fffc000] Shutdown server RPC [0x3fffc000] End of Hypersim execution 1 SolutionIf you are trying to use HYPERSIM linux, you don't need the service called "hy.core" to run and when you stop that service, the switch between "Edition" to "Simulation" does not cause the crash in HYPERSIM. To stop the service, in MobaXterm console, type "service hy.core stop" and press Enter If you want to go back to the normal mode of simulating your offline model in Windows and the real time in the target, don't forget to restart the service "hy.core" by, doing the following in MobaXterm, "service hy.core restart" Note: This issue is strictly linked to HYPERSIM Linux 6.2.1 |